FDF10210 Certificate I in Pharmaceutical Manufacturing

deletedthe status token training.gov.au records

Item 14

The two years of s 14(1)(b), counted from the date this product was removed from the National Register, ended before the instrument commenced on 1 July 2025 — so no completion date is shown here: the instrument imposes nothing before that day.

For an RTO registered by ASQA, nobody may be allowed to commence training and assessment in FDF10210 today. training.gov.au lists it as Deleted, and s 14(2) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025) requires the organisation to ensure it does not allow individuals to commence training and assessment in a training product that has expired, been removed or deleted from the National Register. s 14(2) carries no transition period of its own and no date to compute, and the “unless otherwise approved by the National VET Regulator” opening sits in s 14(1) only. It governs starts, not learners already enrolled: s 14(2) sets no date of its own for them — their completion period under s 14(1)(b)/(c) is stated separately on this page. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

The status above is the one training.gov.au records for FDF10210, written exactly as the register writes it. It is not one of the three we put into words, so we leave it in the register's own terms.

Product type
Qualification
Training package
FDF10 — Food Processing
Currency period ends
16 December 2018
Latest release
Release 3 · 6 September 2012 · 3 releases in all
Supersedes
FDF10203
Superseded by
nothing — no replacement listed

Where the register points next

training.gov.au does not publish a supersession path from FDF10210. There is no chain to follow from here.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • FDF10203FDF10210not equivalent30 January 2011

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for FDF10210 and for its training package FDF10 (release 4.1), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • FDF10210_R3.docxFDF10210 release 3 · product document · published 26 November 2024
  • FDF10210_R3.pdfFDF10210 release 3 · product document · published 7 September 2012

Is FDF10210 on your scope?

This page is the register's record of one product. What it cannot tell you is whether FDF10210 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What FDF10210 is made of

training.gov.au lists 21 units for FDF10210: 4 core and 17 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 4 listed

CodeUnitIn this product
FDFOHS1001AWork safelynot current
FDFOP1010ACommunicate workplace informationnot current
FDFPH1001AFollow work procedures to maintain Good Manufacturing Practicenot current
MSAENV272BParticipate in environmentally sustainable work practicesnot current

Elective units 17 listed

CodeUnitIn this product
FDFOP1001APack or unpack product manuallynot current
FDFOP1002AOperate automated washing equipmentnot current
FDFOP1003ACarry out manual handling tasksnot current
FDFOP1004APrepare basic mixesnot current
FDFOP1005AOperate basic equipmentnot current
FDFOP1006AMonitor process operationnot current
FDFOP1007AParticipate effectively in a workplace environmentnot current
FDFOP1008ATake and record basic measurementsnot current
FDFOP2061AUse numerical applications in the workplacenot current
FDFRB1001AFinish productsnot current
SIRXCCS201Apply point-of-sale handling proceduresnot current
SIRXCCS202Interact with customersnot current
SIRXICT001AOperate retail technologynot current
SIRXINV001APerform stock control proceduresnot current
SIRXSLS201Sell products and servicesnot current
TLIA2014AUse product knowledge to complete work operationsnot current
TLID1002AShift a load using manually-operated equipmentnot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every FDF training product on the register · Search all training products

Take this with you — one email with how the register lists FDF10210 today. Its dates need the full read this page does, and the email says so rather than estimating them. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is FDF10210 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.