Can an RTO still enrol new students in FPI30805?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 7 February 2013. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in FPI30805?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

FPI30805 Certificate III in Woodmachining

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

FPI30805Superseded — equivalentCertificate III in Woodmachining
equivalent
FPI30811Superseded — equivalentCertificate III in Woodmachining
equivalent
FWP30816Superseded — not equivalentCertificate III in Woodmachining
not equivalent
FWP31119Superseded — equivalentCertificate III in Wood Machining
equivalent
FWP31121CurrentCertificate III in Wood Machining

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

FPI30805FPI30811equivalent6 February 2012
The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for FPI30805 and for its training package FPI05 (release 3.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

FPI30805_R1.pdfFPI30805 release 1 · product document · published 20 July 2012
FPI30805_R1.docxFPI30805 release 1 · product document · published 26 November 2024

Is FPI30805 on your scope?

This page is the register's record of one product. What it cannot tell you is whether FPI30805 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What FPI30805 is made of

training.gov.au lists 49 units for FPI30805. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 49 listed

Code	Unit	Core or elective	In this product
BSBFLM312C	Contribute to team effectiveness	`N/A`	not current
BSBWOR204A	Use business technology	`N/A`	not current
FPICOR2201B	Work effectively in the forest and forest products industry	`N/A`	not current
FPICOR2202B	Communicate and interact effectively in the workplace	`N/A`	not current
FPICOR3201B	Implement safety, health and environment policies and procedures	`N/A`	not current
FPICOR3202B	Conduct quality and product care procedures	`N/A`	not current
FPICOT2205B	Tail out materials	`N/A`	not current
FPICOT2207B	Dress boards and timber	`N/A`	not current
FPICOT2208B	Resaw boards and timber	`N/A`	not current
FPICOT2212B	Grade hardwood sawn and milled products	`N/A`	not current
FPICOT2213B	Grade softwood sawn and milled products	`N/A`	not current
FPICOT2214B	Grade cypress sawn and milled products	`N/A`	not current
FPICOT2215B	Visually stress grade hardwood	`N/A`	not current
FPICOT2216B	Visually stress grade softwood	`N/A`	not current
FPICOT2217B	Visually stress grade cypress	`N/A`	not current
FPICOT2219B	Use hand-held tools	`N/A`	not current
FPICOT2224B	Band edges of panels	`N/A`	not current
FPICOT2232B	Cut material to shape using a saw	`N/A`	not current
FPICOT3201B	Hand sharpen knives and blades	`N/A`	not current
FPICOT3204B	Prepare and interpret sketches and drawings	`N/A`	not current
FPICOT3205B	Dress boards using multi-headed machines	`N/A`	not current
FPICOT3206B	Cut material using high speed optimiser	`N/A`	not current
FPICOT3207B	Set up, operate and maintain finger jointing operations	`N/A`	not current
FPICOT3209B	Set up, operate and maintain end matching operations	`N/A`	not current
FPICOT3210B	Sharpen cutting tools	`N/A`	not current
FPICOT3212B	Replace saws, blades and guides	`N/A`	not current
FPICOT3213B	Manufacture cutting tools	`N/A`	not current
FPICOT3214B	Take off material quantities	`N/A`	not current
FPICOT3216B	Assess and maintain saw performance	`N/A`	not current
FPICOT3217B	Assess and maintain cutter performance	`N/A`	not current

Show the remaining 19 units

Code	Unit	Core or elective	In this product
FPICOT3233B	Sharpen and align blades and knives	`N/A`	not current
FPICOT3234B	Cut material using CNC sizing machines	`N/A`	not current
FPICOT3235B	Machine material using CNC machining and processing centres	`N/A`	not current
FPICOT3237B	Produce templates	`N/A`	not current
FPICOT3239B	Create drawings using computer aided design systems	`N/A`	not current
FPICOT3244B	Cut material to profile	`N/A`	not current
FPICOT3247B	Select timber for forestry operations	`N/A`	not current
FPISAW3208B	Sharpen circular saws	`N/A`	not current
FPISAW3210B	File and set saws	`N/A`	not current
FPISAW3213B	Level and tension circular saws	`N/A`	not current
FPISAW3218B	Replace tungsten tips	`N/A`	not current
FPISAW3226B	Saw logs using CNC optimising systems	`N/A`	not current
FPISAW3228B	Apply principles of blade design to sawing procedures	`N/A`	not current
FPITMM2202B	Machine material	`N/A`	not current
FPITMM3201B	Convert timber	`N/A`	not current
FPITMM3202B	Manufacture using joinery machines	`N/A`	not current
FPITMM3203B	Estimate and cost job	`N/A`	not current
FPITMM4203B	Install and commission CNC software	`N/A`	not current
FPIWPP2210B	Cut panels to profile	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every FPI training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is FPI30805 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.