Where the register points next
training.gov.au points at nothing after FWP31121: it is the current product, and no replacement is listed.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is FWP31121 on your scope?
This page is the register's record of one product. What it cannot tell you is whether FWP31121 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What FWP31121 is made of
training.gov.au lists 55 units for FWP31121: 8 core and 47 elective. To complete it, the register publishes a rule of 8 core units plus 19 electives — 27 units in all.
Core units 8 listed
| Code | Unit | In this product |
|---|---|---|
| BSBTWK201 | Work effectively with others | ●current |
| FWPCOR2206 | Work effectively in the forest and wood products industry | ●current |
| FWPCOR2208 | Communicate and interact effectively in the forest and wood products industry | ●current |
| FWPCOR3205 | Apply safety, health and environmental requirements in forest and wood products operations | ●current |
| FWPCOT2257 | Use hand-held tools | ●current |
| FWPCOT3290 | Apply knowledge of timber properties, sawmill operations and sawmilling equipment | ●current |
| FWPCOT3322 | Apply quality and product care procedures in forest and wood products operations | ●current |
| MSFDN4003 | Produce patterns and templates | !not current |
Elective units 47 listed
| Code | Unit | In this product |
|---|---|---|
| FWPCOT2243 | Tail out timber product and waste material | ●current |
| FWPCOT2244 | Operate and maintain a thicknesser | ●current |
| FWPCOT2246 | Appearance grade hardwood sawn and milled products | ●current |
| FWPCOT2249 | Visually stress grade hardwood | ●current |
| FWPCOT2250 | Visually stress grade softwood | ●current |
| FWPCOT2251 | Visually stress grade cypress | ●current |
| FWPCOT2269 | Operate and maintain a table saw | ●current |
| FWPCOT3271 | Hand sharpen knives and blades for commercial and domestic cutting services | ●current |
| FWPCOT3272 | Set up and run multi-head moulder/planer to produce simple profiles | ●current |
| FWPCOT3273 | Set up and run multi-head moulder to produce complex profiles | ●current |
| FWPCOT3274 | Cut timber products using high-speed optimiser | ●current |
| FWPCOT3275 | Set up, operate and maintain end matching machines | ●current |
| FWPCOT3276 | Sharpen cutters using a straight knife grinder | ●current |
| FWPCOT3277 | Sharpen cutters in head using a profile knife grinder | ●current |
| FWPCOT3278 | Sharpen cutters in head using a straight knife grinder | ●current |
| FWPCOT3280 | Replace saw blades, knives and guides | ●current |
| FWPCOT3281 | Manufacture profile cutters | ●current |
| FWPCOT3283 | Sharpen and position blades or knives in chipper, canter and reducer | ●current |
| FWPCOT3286 | Identify levelling and tensioning requirements for saw blades | ●current |
| FWPCOT3289 | Load and prove operating program for CNC machine | ●current |
| FWPCOT3291 | Apply principles of timber and process optimisation in sawmill operations | ●current |
| FWPCOT3292 | Calibrate and maintain scanning equipment used in sawmilling operations | ●current |
| FWPCOT3293 | Use scanning equipment for timber grading | ●current |
| FWPCOT3295 | Assess and maintain cutter performance | ●current |
| FWPCOT3298 | Produce templates | ●current |
| FWPCOT3304 | Take off material quantities | ●current |
| FWPCOT3307 | Create drawings using computer aided design software | ●current |
| FWPCOT3327 | Contribute to energy efficiency in the forest and wood products industry | ●current |
| FWPCOT3332 | Machine timber or engineered wood products using CNC machining and processing centres | ●current |
| FWPCOT3335 | Conduct operator level equipment maintenance in forest and wood products industry | ●current |
Show the remaining 17 elective units
| Code | Unit | In this product |
|---|---|---|
| FWPCOT3336 | Coordinate set up and operation of timber finger jointing line | ●current |
| FWPCOT3337 | Operate timber finger jointing line | ●current |
| FWPCOT3349 | Assess timber against quality requirements and specifications | ●current |
| FWPSAW3233 | Sharpen circular saw blades | ●current |
| FWPSAW3237 | Level and tension circular saw blades | ●current |
| FWPSAW3247 | Replace tungsten tips | ●current |
| FWPSAW3251 | Apply principles of blade design to sawing procedures | ●current |
| FWPSAW3255 | Operate conventional log breakdown saw line | ●current |
| FWPTMM4213 | Test finger jointed timber | ●current |
| FWPTMM4214 | Test laminated wood product | ●current |
| MSFFM3032 | Set up, operate and maintain sawing machines | ●current |
| MSFFM3037 | Set up, operate and maintain routing and shaping machines | ●current |
| MSL973022 | Conduct laboratory-based acceptance tests for construction materials | ●current |
| MSMSUP292 | Sample and test materials and product | ●current |
| MSMSUP390 | Use structured problem-solving tools | ●current |
| MSS402042 | Apply 5S procedures | ●current |
| MSS404056 | Apply statistics to operational processes | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every FWP training product on the register · Search all training products
Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day FWP31121 or anything else on it is superseded.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.