Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is FWP31119 on your scope?
This page is the register's record of one product. What it cannot tell you is whether FWP31119 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What FWP31119 is made of
training.gov.au lists 50 units for FWP31119: 8 core and 42 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 8 listed
| Code | Unit | In this product |
|---|---|---|
| BSBFLM312 | Contribute to team effectiveness | !not current |
| FWPCOR2201 | Work effectively in the forest and forest products industry | !not current |
| FWPCOR2202 | Communicate and interact effectively in the workplace | !not current |
| FWPCOR3201 | Implement safety, health and environment policies and procedures | !not current |
| FWPCOR3202 | Conduct quality and product care procedures | !not current |
| FWPCOT2219 | Use hand-held tools | !not current |
| FWPCOT3204 | Prepare and interpret sketches and drawings | !not current |
| FWPCOT3290 | Apply knowledge of timber properties, sawmill operations and sawmilling equipment | ●current |
Elective units 42 listed
| Code | Unit | In this product |
|---|---|---|
| FWPCOT2243 | Tail out timber product and waste material | ●current |
| FWPCOT2244 | Operate and maintain a thicknesser | ●current |
| FWPCOT2245 | Operate and maintain a table saw | !not current |
| FWPCOT2246 | Appearance grade hardwood sawn and milled products | ●current |
| FWPCOT2249 | Visually stress grade hardwood | ●current |
| FWPCOT2250 | Visually stress grade softwood | ●current |
| FWPCOT2251 | Visually stress grade cypress | ●current |
| FWPCOT3235 | Machine material using CNC machining and processing centres | !not current |
| FWPCOT3263 | Maintain and contribute to energy efficiency | !not current |
| FWPCOT3271 | Hand sharpen knives and blades for commercial and domestic cutting services | ●current |
| FWPCOT3272 | Set up and run multi-head moulder/planer to produce simple profiles | ●current |
| FWPCOT3273 | Set up and run multi-head moulder to produce complex profiles | ●current |
| FWPCOT3274 | Cut timber products using high-speed optimiser | ●current |
| FWPCOT3275 | Set up, operate and maintain end matching machines | ●current |
| FWPCOT3276 | Sharpen cutters using a straight knife grinder | ●current |
| FWPCOT3277 | Sharpen cutters in head using a profile knife grinder | ●current |
| FWPCOT3278 | Sharpen cutters in head using a straight knife grinder | ●current |
| FWPCOT3280 | Replace saw blades, knives and guides | ●current |
| FWPCOT3281 | Manufacture profile cutters | ●current |
| FWPCOT3283 | Sharpen and position blades or knives in chipper, canter and reducer | ●current |
| FWPCOT3285 | Apply knowledge of wood technology principles to end use applications | !not current |
| FWPCOT3286 | Identify levelling and tensioning requirements for saw blades | ●current |
| FWPCOT3288 | Set up, operate and maintain finger jointing machines | !not current |
| FWPCOT3289 | Load and prove operating program for CNC machine | ●current |
| FWPCOT3291 | Apply principles of timber and process optimisation in sawmill operations | ●current |
| FWPCOT3292 | Calibrate and maintain scanning equipment used in sawmilling operations | ●current |
| FWPCOT3293 | Use scanning equipment for timber grading | ●current |
| FWPCOT3295 | Assess and maintain cutter performance | ●current |
| FWPCOT3298 | Produce templates | ●current |
| FWPCOT3304 | Take off material quantities | ●current |
Show the remaining 12 elective units
| Code | Unit | In this product |
|---|---|---|
| FWPCOT3307 | Create drawings using computer aided design software | ●current |
| FWPSAW3233 | Sharpen circular saw blades | ●current |
| FWPSAW3237 | Level and tension circular saw blades | ●current |
| FWPSAW3241 | Set up and operate production saws used in sawmill operations | !not current |
| FWPSAW3247 | Replace tungsten tips | ●current |
| FWPSAW3251 | Apply principles of blade design to sawing procedures | ●current |
| FWPTMM4204 | Sample and test products to specifications | !not current |
| MSFFM3012 | Set up, operate and maintain sawing machines | !not current |
| MSFFM3017 | Set up, operate and maintain routing and shaping machines | !not current |
| MSMSUP390 | Use structured problem-solving tools | ●current |
| MSS402040 | Apply 5S procedures | !not current |
| MSS404054 | Apply statistics to operational processes | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every FWP training product on the register · Search all training products
Is FWP31119 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.