FWPSAW3241 Set up and operate production saws used in sawmill operations

Supersededtraining.gov.au: supersededNonEquivalent

The currency period for FWPSAW3241 ended on 23 January 2023 — 3 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 25 January 2024 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Unit of competency
Training package
FWP — Forest and Wood Products Training Package
Currency period ends
23 January 2023
Latest release
Release 1 · 31 January 2020
Supersedes
nothing — no earlier product listed
Superseded by
FWPSAW3255 not equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. FWPSAW3241Superseded — not equivalentSet up and operate production saws used in sawmill operations
  2. not equivalent
  3. FWPSAW3255CurrentOperate conventional log breakdown saw line

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • FWPSAW3241FWPSAW3255not equivalent24 January 2023

    Redesigned unit that includes content from FWPSAW3230 Perform primary log breakdown, FWPSAW3231 Perform secondary log breakdown and FWPSAW3241 Set up and operate production saws used in sawmill operations

Is FWPSAW3241 on your scope?

This page is the register's record of one product. What it cannot tell you is whether FWPSAW3241 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where FWPSAW3241 is used

training.gov.au lists FWPSAW3241 inside 3 training products, 1 of them current. Every one of them is below, with the register's own core or elective flag for FWPSAW3241 in that product.

Current products 1 listed

CodeTraining productTypeFWPSAW3241 is
FWP31121Certificate III in Wood MachiningQualificationelective

Products no longer current 2 listed

The register still records FWPSAW3241 inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

CodeTraining productTypeFWPSAW3241 is
FWP30316Certificate III in Sawmilling and ProcessingQualificationelective
FWP31119Certificate III in Wood MachiningQualificationelective

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every FWP training product on the register · Search all training products

Is FWPSAW3241 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.