HLT43612 Certificate IV in Rehabilitation and Assistive Technology

deletedthe status token training.gov.au records

Item 14

The two years of s 14(1)(b), counted from the date this product was removed from the National Register, ended before the instrument commenced on 1 July 2025 — so no completion date is shown here: the instrument imposes nothing before that day.

For an RTO registered by ASQA, nobody may be allowed to commence training and assessment in HLT43612 today. training.gov.au lists it as Deleted, and s 14(2) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025) requires the organisation to ensure it does not allow individuals to commence training and assessment in a training product that has expired, been removed or deleted from the National Register. s 14(2) carries no transition period of its own and no date to compute, and the “unless otherwise approved by the National VET Regulator” opening sits in s 14(1) only. It governs starts, not learners already enrolled: s 14(2) sets no date of its own for them — their completion period under s 14(1)(b)/(c) is stated separately on this page. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

The status above is the one training.gov.au records for HLT43612, written exactly as the register writes it. It is not one of the three we put into words, so we leave it in the register's own terms.

Product type
Qualification
Training package
HLT07 — Health Training Package
Currency period ends
6 December 2015
Latest release
Release 1 · 7 May 2012
Supersedes
HLT43607
Superseded by
nothing — no replacement listed

Where the register points next

training.gov.au does not publish a supersession path from HLT43612. There is no chain to follow from here.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • HLT43607HLT43612equivalent6 May 2012

    Updated in V5 Updated core unit HLTFA311A Apply first aid Updated core WHS units

Official documents on the register

What training.gov.au lists for HLT43612 and for its training package HLT07 (release 5.1), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • HLT43612_R1.docxHLT43612 release 1 · product document · published 26 November 2024
  • HLT43612_R1.pdfHLT43612 release 1 · product document · published 20 July 2012

Is HLT43612 on your scope?

This page is the register's record of one product. What it cannot tell you is whether HLT43612 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What HLT43612 is made of

training.gov.au lists 35 units for HLT43612. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 35 listed

CodeUnitCore or electiveIn this product
BSBFLM303CContribute to effective workplace relationshipsN/Anot current
BSBWOR301BOrganise personal work priorities and developmentN/Anot current
CHCDIS301CWork effectively with people with a disabilityN/Anot current
HLTAP301BRecognise healthy body systems in a health care contextN/Anot current
HLTART401BWork effectively in the rehabilitation environmentN/Anot current
HLTART402CIdentify and address specific needs within the rehabilitation environmentN/Anot current
HLTART404BInstall and maintain augmentative and alternative communication (AAC) devicesN/Anot current
HLTART405CInstall and maintain environmental control systemsN/Anot current
HLTART406CModify and maintain wheelchairsN/Anot current
HLTART407BTest and evaluate compliance of assistive technology equipmentN/Anot current
HLTART408CAdapt, install and construct postural seatingN/Anot current
HLTART409CConstruct, adapt and install pressure management systemsN/Anot current
HLTCSD306DRespond effectively to behaviours of concernN/Anot current
HLTFA311AApply first aidN/Anot current
HLTHIR301CCommunicate and work effectively in healthN/Anot current
HLTHIR403CWork effectively with culturally diverse clients and co-workersN/Anot current
HLTHIR404DWork effectively with Aboriginal and/or Torres Strait Islander peopleN/Anot current
HLTIN301CComply with infection control policies and proceduresN/Anot current
HLTWHS300AContribute to WHS processesN/Anot current
HLTWHS401AMaintain workplace WHS processesN/Anot current
MEM04011BProduce polymer patternsN/Anot current
MEM04015BDevelop and manufacture vacuum forming moulds and associated equipmentN/Anot current
MEM05004CPerform routine oxy acetylene weldingN/Anot current
MEM05006CPerform brazing and or silver solderingN/Anot current
MEM05010CApply fabrication, forming and shaping techniquesN/Anot current
MEM05012CPerform routine manual metal arc weldingN/Anot current
MEM05019DWeld using gas tungsten arc welding processN/Anot current
MEM05020CPerform advanced welding using gas tungsten arc welding processN/Anot current
MEM05026CApply welding principlesN/Anot current
MEM07005CPerform general machiningN/Anot current
Show the remaining 5 units
CodeUnitCore or electiveIn this product
MEM10002BTerminate and connect electrical wiringN/Anot current
MEM16013AOperate in a self-directed teamN/Anot current
MEM18004BMaintain and overhaul mechanical equipmentN/Anot current
MEM18006CRepair and fit engineering componentsN/Anot current
MEM18030BDiagnose and rectify low voltage electrical systemsN/Anot current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every HLT training product on the register · Search all training products

Take this with you — one email with how the register lists HLT43612 today. Its dates need the full read this page does, and the email says so rather than estimating them. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is HLT43612 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.