When must new enrolments into LMF60208 stop?

New enrolments are not permitted from 10 December 2014 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in LMF60208?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

LMF60208 Advanced Diploma of Interior Design

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

LMF60208Superseded — equivalentAdvanced Diploma of Interior Design
equivalent
MSF60113Superseded — equivalentAdvanced Diploma of Interior Design
equivalent
MSF60118Superseded — equivalentAdvanced Diploma of Interior Design
equivalent
MSF60122CurrentAdvanced Diploma of Interior Design

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

LMF60208MSF60113equivalent9 December 2013
The register records this supersession but attaches no note on what changed.

Is LMF60208 on your scope?

This page is the register's record of one product. What it cannot tell you is whether LMF60208 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What LMF60208 is made of

training.gov.au lists 75 units for LMF60208. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 75 listed

Code	Unit	Core or elective	In this product
BSBCRT401A	Articulate, present and debate ideas	`N/A`	not current
BSBCRT402A	Collaborate in a creative process	`N/A`	not current
BSBCRT501A	Originate and develop concepts	`N/A`	not current
BSBDES301A	Explore the use of colour	`N/A`	not current
BSBDES302A	Explore and apply the creative design process to 2D forms	`N/A`	not current
BSBDES303A	Explore and apply the creative design process to 3D forms	`N/A`	not current
BSBDES304A	Source and apply design industry knowledge	`N/A`	not current
BSBDES305A	Source and apply information on the history and theory of design	`N/A`	not current
BSBDES401A	Generate design solutions	`N/A`	not current
BSBDES403A	Develop and extend design skills and practice	`N/A`	not current
BSBDES502A	Establish, negotiate and refine a design brief	`N/A`	not current
BSBDES601A	Manage design realisation	`N/A`	not current
BSBDES602A	Research global design trends	`N/A`	not current
BSBMGT402A	Implement operational plan	`N/A`	not current
BSBPMG510A	Manage projects	`N/A`	not current
BSBSMB405A	Monitor and manage small business operations	`N/A`	not current
BSBWOR204A	Use business technology	`N/A`	not current
CPCCBC4037A	Prepare drawings for heritage works	`N/A`	not current
CUFANM302A	Create 3D digital animations	`N/A`	not current
CUFANM303A	Create 3D digital models	`N/A`	not current
CUFANM502A	Create 3D digital environments	`N/A`	not current
CUFDIG303A	Produce and prepare photo images	`N/A`	not current
CUFDIG304A	Create visual design components	`N/A`	not current
CUFDIG507A	Design digital simulations	`N/A`	not current
CUVCOR08B	Produce drawings to represent and communicate the concept	`N/A`	not current
CUVCOR09B	Select and apply drawing techniques and media to represent and communicate the concept	`N/A`	not current
CUVCRS03B	Produce computer-aided drawings	`N/A`	not current
CUVCRS04B	Produce technical drawings	`N/A`	not current
CUVDSP11B	Research and apply techniques for illustrative work	`N/A`	not current
CUVDSP15B	Research and apply techniques for application to spatial design	`N/A`	not current

Show the remaining 45 units

Code	Unit	Core or elective	In this product
LMFFDT4012A	Produce ideation drawings	`N/A`	not current
LMFFDT5002A	Apply resources sustainably	`N/A`	not current
LMFFDT5004A	Develop self as a furniture designer	`N/A`	not current
LMFFDT6003A	Evaluate and participate in design industry networks	`N/A`	not current
LMFFDT6004A	Investigate legal requirements for design	`N/A`	not current
LMFID3002A	Source and specify decoration products	`N/A`	not current
LMFID4001A	Research, analyse and apply colour for interior spaces	`N/A`	not current
LMFID4003A	Prepare a materials board for client presentation	`N/A`	not current
LMFID4004A	Research and recommend furniture and accessories	`N/A`	not current
LMFID4005A	Research and recommend soft furnishings for interiors	`N/A`	not current
LMFID4006A	Research and recommend hard materials and finishes for interiors	`N/A`	not current
LMFID4007A	Identify materials, construction techniques and methods used in building interiors	`N/A`	not current
LMFID4008A	Assess interior light and recommend light fittings	`N/A`	not current
LMFID4009A	Research architectural styles and movements	`N/A`	not current
LMFID4010A	Research interior decoration and design influences	`N/A`	not current
LMFID4011A	Determine occupational health and safety implications of interior effects	`N/A`	not current
LMFID5001A	Design residential interiors	`N/A`	not current
LMFID5002A	Develop a decoration proposal for a complex site	`N/A`	not current
LMFID5003A	Evaluate site for interior design brief	`N/A`	not current
LMFID5004A	Specify structural elements, systems and services for interior spaces	`N/A`	not current
LMFID5005A	Explore and apply creative design methodology to interior space	`N/A`	not current
LMFID5006A	Design interior lighting	`N/A`	not current
LMFID5007A	Decorate for events	`N/A`	not current
LMFID5008A	Design for people with disabilities and the elderly	`N/A`	not current
LMFID5009A	Research and recommend colour and applied finishes	`N/A`	not current
LMFID5010A	Provide interior styling service	`N/A`	not current
LMFID5011A	Specify soft furnishings for complete interior solution	`N/A`	not current
LMFID5012A	Research and recommend artwork	`N/A`	not current
LMFID5013A	Design for small to medium scale commercial or institutional interiors	`N/A`	not current
LMFID5014A	Use CAD applications to complete models and documentation for interior design projects	`N/A`	not current
LMFID5015A	Decorate interiors for restoration projects	`N/A`	not current
LMFID6001A	Resolve complex spatial design problems through modelling	`N/A`	not current
LMFID6002A	Apply 3-D visualisation techniques to represent interior designs	`N/A`	not current
LMFID6003A	Design for large scale commercial or institutional interiors	`N/A`	not current
LMFID6004A	Design interiors for hospitality environments	`N/A`	not current
LMFID6005A	Design for retail interiors	`N/A`	not current
LMFID6006A	Design for conservation and restoration projects	`N/A`	not current
LMFID6007A	Select and instruct consultants and contractors	`N/A`	not current
LMFID6008A	Evaluate design project outcomes	`N/A`	not current
LMFID6009A	Produce digital presentations for commercial projects	`N/A`	not current
MEM16006A	Organise and communicate information	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current
MSAENV672B	Develop workplace policy and procedures for environmental sustainability	`N/A`	not current
SIRRMER009A	Produce perspective drawing, plans and elevations	`N/A`	not current
SIRRMER020A	Create and implement exhibition space	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every LMF training product on the register · Search all training products

Is LMF60208 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.