Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is MSF30313 on your scope?
This page is the register's record of one product. What it cannot tell you is whether MSF30313 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What MSF30313 is made of
training.gov.au lists 52 units for MSF30313: 11 core and 41 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 11 listed
| Code | Unit | In this product |
|---|---|---|
| MSFFM2001 | Use furniture making sector hand and power tools | !not current |
| MSFFM2010 | Set up and operate basic static machines | !not current |
| MSFFM3009 | Produce manual and computer-aided production drawings | !not current |
| MSFFM3010 | Prepare cutting list from plans and job specifications | !not current |
| MSFGN2001 | Make measurements and calculations | !not current |
| MSFGN3001 | Read and interpret work documents | !not current |
| MSFGN3002 | Estimate and cost job | !not current |
| MSMENV272 | Participate in environmentally sustainable work practices | ●current |
| MSMSUP102 | Communicate in the workplace | ●current |
| MSMSUP106 | Work in a team | ●current |
| MSMWHS200 | Work safely | ●current |
Elective units 41 listed
| Code | Unit | In this product |
|---|---|---|
| MEM07001B | Perform operational maintenance of machines/equipment | !not current |
| MEM14003B | Undertake basic production scheduling | !not current |
| MEM18001C | Use hand tools | !not current |
| MEM30017A | Use basic preventative maintenance techniques and tools | !not current |
| MEM30031A | Operate computer-aided design (CAD) system to produce basic drawing elements | !not current |
| MSFFDM4015 | Produce patterns and templates | ●current |
| MSFFDM4018 | Research and organise product inspection and testing | ●current |
| MSFFDM4023 | Set up, operate and maintain basic static woodworking machines for furniture designs | ●current |
| MSFFF2004 | Prepare surfaces for finishing | !not current |
| MSFFM2002 | Assemble furnishing components | !not current |
| MSFFM2004 | Apply sheet laminates by hand | !not current |
| MSFFM2005 | Join solid timber | !not current |
| MSFFM2007 | Follow plans to assemble production furniture | !not current |
| MSFFM2011 | Apply manufactured board conversion techniques | !not current |
| MSFFM2012 | Set up, operate and maintain pressure and clamping machines | !not current |
| MSFFM3007 | Prepare and apply decorative surfaces for furniture | !not current |
| MSFFM3008 | Select timbers for furniture production | !not current |
| MSFFM3011 | Measure and draw site layout for manufactured furniture products | !not current |
| MSFFM3012 | Set up, operate and maintain sawing machines | !not current |
| MSFFM3013 | Set up, operate and maintain drilling machines | !not current |
| MSFFM3014 | Set up, operate and maintain joining machines | !not current |
| MSFFM3015 | Set up, operate and maintain planing and finishing machines | !not current |
| MSFFM3016 | Set up, operate and maintain multi-head planing and moulding machines | !not current |
| MSFFM3017 | Set up, operate and maintain routing and shaping machines | !not current |
| MSFFM3018 | Set up, operate and maintain mechanical wood-turning lathes | !not current |
| MSFFM3019 | Set up, operate and maintain automated edge banding machines | !not current |
| MSFFM3020 | Fabricate synthetic solid surface products | !not current |
| MSFFM3021 | Set up, operate and maintain computer numerically controlled (CNC) sizing machines | !not current |
| MSFFM3022 | Set up, operate and maintain computer numerically controlled (CNC) machining and processing centres | !not current |
| MSFFM3023 | Produce and maintain cutting tools | !not current |
Show the remaining 11 elective units
| Code | Unit | In this product |
|---|---|---|
| MSFFM3024 | Construct jigs and fixtures | ●current |
| MSS402001 | Apply competitive systems and practices | !not current |
| MSS402010 | Manage the impact of change on own work | !not current |
| MSS402020 | Apply quick changeover procedures | !not current |
| MSS402021 | Apply Just in Time procedures | !not current |
| MSS402051 | Apply quality standards | !not current |
| MSS402081 | Contribute to the application of a proactive maintenance strategy | !not current |
| MSS402083 | Use planning software systems in operations | !not current |
| MSS403087 | Mistake proof an operational process | !not current |
| TLID0021 | Store and handle dangerous goods and hazardous substances | ●current |
| UEEEC0072 | Troubleshoot microcontroller-based hardware systems | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every MSF training product on the register · Search all training products
Is MSF30313 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.