Where the register points next
training.gov.au points at nothing after MSF30322: it is the current product, and no replacement is listed.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
MSF30213MSF30322≠not equivalent7 December 2022
The register records this supersession but attaches no note on what changed.
MSF30313MSF30322≠not equivalent7 December 2022
The register records this supersession but attaches no note on what changed.
MSF31113MSF30322≠not equivalent7 December 2022
The register records this supersession but attaches no note on what changed.
Is MSF30322 on your scope?
This page is the register's record of one product. What it cannot tell you is whether MSF30322 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What MSF30322 is made of
training.gov.au lists 72 units for MSF30322: 8 core and 64 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 8 listed
| Code | Unit | In this product |
|---|---|---|
| MSFFM2013 | Use furniture making hand and power tools | ●current |
| MSFFM3030 | Produce manual and computer-aided production drawings | ●current |
| MSFFM3031 | Prepare cutting lists from design and production documentation | ●current |
| MSFGN2001 | Make measurements and calculations | !not current |
| MSFGN3005 | Read and interpret work documents | ●current |
| MSMENV272 | Participate in environmentally sustainable work practices | ●current |
| MSMSUP102 | Communicate in the workplace | ●current |
| MSMSUP106 | Work in a team | ●current |
Elective units 64 listed
| Code | Unit | In this product |
|---|---|---|
| AURVTT121 | Select and apply adhesives in automotive and marine service and repair work | ●current |
| BSBOPS304 | Deliver and monitor a service to customers | ●current |
| CPCCCA3014 | Construct and install bulkheads | ●current |
| CPCCJN3003 | Manufacture components for doors, windows and frames | ●current |
| CPCCPB3004 | Fix wet area sheets | ●current |
| CPCCWC3004 | Install suspended ceilings | ●current |
| CPCCWHS2001 | Apply WHS requirements, policies and procedures in the construction industry | ●current |
| CPCSHP3005 | Apply and trim decorative additions to shopfittings and components | ●current |
| CPCWHS1001 | Prepare to work safely in the construction industry | ●current |
| CUAACD312 | Produce computer-aided drawings | ●current |
| MSFCP2005 | Use coopering sector hand and power tools | ●current |
| MSFCP3001 | Produce barrels using non-fired processes | ●current |
| MSFCP3002 | Produce barrels using fired processes | ●current |
| MSFCP3003 | Maintain and repair barrels | ●current |
| MSFFDM4002 | Collect and interpret information to support production processes | ●current |
| MSFFDM4005 | Design, construct and test jigs | ●current |
| MSFFDM4009 | Match furnishing style and materials to customer requirements | ●current |
| MSFFDM4012 | Produce computer-aided line and component production drawings | ●current |
| MSFFDM4014 | Produce manual and computer-aided drawings from design concepts | ●current |
| MSFFDM4018 | Research and organise product inspection and testing | ●current |
| MSFFF2009 | Use furniture finishing hand and power tools | ●current |
| MSFFF2012 | Prepare surfaces for finishing | ●current |
| MSFFF2013 | Maintain spray equipment and booth | ●current |
| MSFFF2014 | Apply surface coatings by spray gun | ●current |
| MSFFF3010 | Match and make up colours | ●current |
| MSFFF3012 | Apply plural component coatings | ●current |
| MSFFF3016 | Apply graining and decorative finishes | ●current |
| MSFFL2038 | Install lay flat vinyl floor coverings | ●current |
| MSFFM2014 | Select and apply hardware | ●current |
| MSFFM2015 | Apply sheet laminates by hand | ●current |
Show the remaining 34 elective units
| Code | Unit | In this product |
|---|---|---|
| MSFFM2016 | Join solid timber | ●current |
| MSFFM2017 | Hand make timber joints | ●current |
| MSFFM2018 | Operate basic static machines safely | ●current |
| MSFFM2019 | Assemble furnishing products | ●current |
| MSFFM3025 | Construct furniture using leg and rail method | ●current |
| MSFFM3026 | Produce angled and curved components using manufactured board | ●current |
| MSFFM3027 | Produce angled and curved components using solid timber | ●current |
| MSFFM3028 | Prepare and apply decorative surfaces for furnishing products | ●current |
| MSFFM3029 | Select timbers for furniture production | ●current |
| MSFFM3032 | Set up, operate and maintain sawing machines | ●current |
| MSFFM3033 | Set up, operate and maintain drilling machines | ●current |
| MSFFM3034 | Set up, operate and maintain joining machines | ●current |
| MSFFM3035 | Set up, operate and maintain planing and finishing machines | ●current |
| MSFFM3036 | Set up, operate and maintain multi-head planing and moulding machines | ●current |
| MSFFM3037 | Set up, operate and maintain routing and shaping machines | ●current |
| MSFFM3038 | Set up, operate and maintain automated edge banding machines | ●current |
| MSFFM3039 | Fabricate synthetic solid surface products | ●current |
| MSFFM3040 | Produce and maintain cutting tools | ●current |
| MSFFM3041 | Determine and document requirements for cabinetry installation | ●current |
| MSFFM3042 | Fabricate cabinetry | ●current |
| MSFFM3043 | Install cabinetry | ●current |
| MSFFM3044 | Set up, operate and maintain computer numerically controlled (CNC) sizing machines | ●current |
| MSFFM3045 | Set up, operate and maintain computer numerically controlled (CNC) machining and processing centres | ●current |
| MSFFT4013 | Coordinate onsite installation of cabinetry | ●current |
| MSFGN3006 | Estimate and cost job | ●current |
| MSFKB2003 | Prepare for cabinetry installation | ●current |
| MSFKB3012 | Plan kitchen and bathroom projects | ●current |
| MSMOPS363 | Organise on-site work | ●current |
| MSMPER200 | Work in accordance with an issued permit | ●current |
| MSMSUP390 | Use structured problem-solving tools | ●current |
| MSMWHS200 | Work safely | ●current |
| MSS402003 | Apply competitive systems and practices | ●current |
| MSS402056 | Apply and improve standardised work practices | ●current |
| TLID0021 | Store and handle dangerous goods and hazardous substances | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every MSF training product on the register · Search all training products
Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day MSF30322 or anything else on it is superseded.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.