When must new enrolments into MSF30813 stop?

New enrolments are not permitted from 3 December 2019 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in MSF30813?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

MSF30813 Certificate III in Flooring Technology

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

MSF30813Superseded — not equivalentCertificate III in Flooring Technology
not equivalent
MSF30818Superseded — not equivalentCertificate III in Flooring Technology
not equivalent
MSF30822CurrentCertificate III in Flooring Technology

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

LMF31208MSF30813not equivalent9 December 2013
Not equivalent
MSF30813MSF30818not equivalent2 December 2018
The register records this supersession but attaches no note on what changed.

Is MSF30813 on your scope?

This page is the register's record of one product. What it cannot tell you is whether MSF30813 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What MSF30813 is made of

training.gov.au lists 93 units for MSF30813: 11 core and 6 elective, and 76 units it marks neither. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 11 listed

Code	Unit	In this product
MSFFL2001	Use flooring technology sector hand and power tools	not current
MSFFL2002	Receive and prepare floor covering materials for installation	not current
MSFFL3001	Plan and cost flooring technology work	not current
MSFFL3002	Establish and maintain a safe flooring technology work environment	not current
MSFGN2001	Make measurements and calculations	not current
MSFGN3001	Read and interpret work documents	not current
MSMENV272	Participate in environmentally sustainable work practices	current
MSMSUP102	Communicate in the workplace	current
MSMSUP106	Work in a team	current
MSMWHS200	Work safely	current
TLID2003	Handle dangerous goods/hazardous substances	not current

Elective units 6 listed

Code	Unit	In this product
BSBCUS301	Deliver and monitor a service to customers	not current
BSBSMB406	Manage small business finances	not current
MSFFL3051	Install timber flooring to joists	not current
MSS402051	Apply quality standards	not current
TAEDEL301	Provide work skill instruction	not current
TAEDEL404	Mentor in the workplace	not current

Units the register marks neither core nor elective 76 listed

Code	Unit	Core or elective	In this product
CPCCCO3046A	Repair and rectify concrete	`N/A`	not current
CPCCOHS1001A	Work safely in the construction industry	`N/A`	not current
CPCCOHS2001A	Apply OHS requirements, policies and procedures in the construction industry	`N/A`	not current
CPCCWP3002A	Apply waterproofing process to internal wet areas	`N/A`	not current
MEM30031A	Operate computer-aided design (CAD) system to produce basic drawing elements	`N/A`	not current
MSFFF3001	Match and make up colours	`N/A`	not current
MSFFL2003	Select, operate and maintain floor covering cutting machine	`N/A`	not current
MSFFL2004	Moisture test timber and concrete floors	`N/A`	not current
MSFFL2005	Remove existing floor coverings	`N/A`	not current
MSFFL2006	Prepare, select and apply smoothing and patching compounds	`N/A`	not current
MSFFL2007	Select and apply appropriate compounds and additives	`N/A`	not current
MSFFL2008	Prepare concrete sub-floors using wet cleaning methods	`N/A`	not current
MSFFL2010	Prepare walls for coverings	`N/A`	not current
MSFFL2011	Select, operate and maintain grinding equipment	`N/A`	not current
MSFFL2015	Coarse sand timber flooring	`N/A`	not current
MSFFL2016	Install hard underlays	`N/A`	not current
MSFFL2017	Install carpet cushion underlays and gripper accessories	`N/A`	not current
MSFFL2018	Install unpatterned tufted and bonded carpet floor coverings	`N/A`	not current
MSFFL2019	Install carpet tiles using standard installation procedures	`N/A`	not current
MSFFL2020	Install unpatterned tufted and bonded carpet floor coverings to stairs	`N/A`	not current
MSFFL2021	Install lay flat vinyl floor coverings	`N/A`	not current
MSFFL2022	Install resilient tiles using standard installation procedures	`N/A`	not current
MSFFL2023	Install laminate timber and bamboo flooring	`N/A`	not current
MSFFL2024	Install engineered timber flooring	`N/A`	not current
MSFFL2025	Install impact and sound absorption underlay	`N/A`	not current
MSFFL2026	Nail strip timber flooring	`N/A`	not current
MSFFL2027	Install expansion joints	`N/A`	not current
MSFFL2028	Install mouldings and edge trims to timber flooring	`N/A`	not current
MSFFL3003	Inspect sub-floors	`N/A`	not current
MSFFL3005	Install carpet tiles using custom designs	`N/A`	not current

Show the remaining 46 units

Code	Unit	Core or elective	In this product
MSFFL3006	Install adhesive fixed carpet floor coverings	`N/A`	not current
MSFFL3007	Install commercial carpet floor coverings	`N/A`	not current
MSFFL3008	Install patterned carpet floor coverings	`N/A`	not current
MSFFL3009	Install custom design carpet and decorative finishes	`N/A`	not current
MSFFL3010	Install synthetic floor coverings to sports facilities and outdoor spaces	`N/A`	not current
MSFFL3011	Install carpet floor coverings to custom design stairs	`N/A`	not current
MSFFL3012	Install linoleum floor coverings	`N/A`	not current
MSFFL3013	Install commercial vinyl floor coverings	`N/A`	not current
MSFFL3014	Install resilient floor coverings using custom designs and decorative finishes	`N/A`	not current
MSFFL3015	Install resilient tiles using custom designs and decorative finishes	`N/A`	not current
MSFFL3016	Install rubber floor coverings	`N/A`	not current
MSFFL3017	Install resilient sheet to walls	`N/A`	not current
MSFFL3018	Install resilient sheet to bench and counter tops	`N/A`	not current
MSFFL3019	Install anti-static resilient floor coverings	`N/A`	not current
MSFFL3020	Install conductive resilient floor coverings	`N/A`	not current
MSFFL3021	Cut and install resilient floor coverings to stairs	`N/A`	not current
MSFFL3022	Mix and apply epoxy and seamless floor coverings	`N/A`	not current
MSFFL3023	Apply solvent-based coatings to timber flooring	`N/A`	not current
MSFFL3024	Apply water-based coatings to timber flooring	`N/A`	not current
MSFFL3025	Apply oil-based coatings to timber flooring	`N/A`	not current
MSFFL3026	Apply composite-based coatings to timber flooring	`N/A`	not current
MSFFL3027	Apply emulsion wax to timber flooring	`N/A`	not current
MSFFL3028	Apply stains and fillers to timber flooring	`N/A`	not current
MSFFL3029	Adapt and apply custom designs to timber flooring	`N/A`	not current
MSFFL3030	Cut and install timber flooring materials to stairs	`N/A`	not current
MSFFL3031	Install direct stick timber flooring	`N/A`	not current
MSFFL3032	Inspect defective timber flooring	`N/A`	not current
MSFFL3033	Install block parquetry flooring	`N/A`	not current
MSFFL3034	Install cork tiles	`N/A`	not current
MSFFL3035	Install patterned parquetry flooring	`N/A`	not current
MSFFL3036	Install mosaic parquetry flooring	`N/A`	not current
MSFFL3037	Install sprung timber flooring	`N/A`	not current
MSFFL3038	Install strip timber flooring onto battens	`N/A`	not current
MSFFL3039	Install strip timber flooring onto plywood	`N/A`	not current
MSFFL3040	Repair timber flooring	`N/A`	not current
MSFFL3041	Maintain timber, laminate and engineered flooring	`N/A`	not current
MSFFL3042	Fine sand timber flooring	`N/A`	not current
MSFFL3043	Edge sand timber flooring	`N/A`	not current
MSFFL3044	Sand cork flooring	`N/A`	not current
MSFFL3045	Sand and fill parquetry flooring	`N/A`	not current
MSFFL3046	Apply finishes to cork flooring	`N/A`	not current
MSFFL3047	Polish concrete floors using planetary machines	`N/A`	not current
MSFFL3048	Select and fit diamond tools for concrete surface preparation and polishing	`N/A`	not current
MSFFL3049	Apply densifiers and sealers to concrete surfaces	`N/A`	not current
MSFFL3050	Provide advice to customers on floor coverings	`N/A`	not current
MSFFT4009	Match furnishing style and materials to customer requirements	`N/A`	not current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MSF training product on the register · Search all training products

Is MSF30813 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.