Can an RTO still enrol new students in MTM30111?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 4 August 2017. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in MTM30111?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

MTM30111 Certificate III in Meat Processing (Boning Room)

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

MTM30111Superseded — equivalentCertificate III in Meat Processing (Boning Room)
equivalent
AMP30116CurrentCertificate III in Meat Processing (Boning Room)

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

MTM30107MTM30111not equivalent21 July 2011
The register records this supersession but attaches no note on what changed.
MTM30111AMP30116equivalent3 August 2016
Equivalent to MTM30111 Certificate III in Meat Processing (Boning Room)

Official documents on the register

What training.gov.au lists for MTM30111 and for its training package MTM11 (release 4.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

MTM30111_R2.docxMTM30111 release 2 · product document · published 26 November 2024
MTM30111_R2.pdfMTM30111 release 2 · product document · published 22 December 2012

Is MTM30111 on your scope?

This page is the register's record of one product. What it cannot tell you is whether MTM30111 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What MTM30111 is made of

training.gov.au lists 21 units for MTM30111: 7 core and 14 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 7 listed

Code	Unit	In this product
MTMCOR201A	Maintain personal equipment	not current
MTMCOR202A	Apply hygiene and sanitation practices	not current
MTMCOR203B	Comply with Quality Assurance and HACCP requirements	not current
MTMCOR204A	Follow safe work policies and procedures	not current
MTMCOR205A	Communicate in the workplace	not current
MTMCOR206A	Overview the meat industry	not current
MTMPSR203A	Sharpen knives	not current

Elective units 14 listed

Code	Unit	In this product
MTMP3052C	Bone small stock carcase - leg	not current
MTMP3054C	Slice and trim leg - small stock	not current
MTMP3055C	Bone large stock carcase - forequarter	not current
MTMP3056C	Bone large stock carcase - hindquarter	not current
MTMP3057C	Slice and trim large stock forequarter	not current
MTMP3058C	Slice and trim large stock hindquarter	not current
MTMP3059C	Break carcase using a bandsaw	not current
MTMP3060C	Operate leg boning machine	not current
MTMP3061C	Operate trunk boning machine	not current
MTMP3062B	Bone small stock carcase - shoulder	not current
MTMP3063B	Bone small stock carcase - middle	not current
MTMP3064B	Slice small stock carcase - shoulder	not current
MTMP3065B	Slice small stock carcase - middle	not current
MTMP3066B	Bone carcase using mechanical aids (large stock)	not current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MTM training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is MTM30111 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.