PMC40116 Certificate IV in Manufactured Mineral Products

deletedthe status token training.gov.au records

Transition clockClosed to new enrolments

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

The status above is the one training.gov.au records for PMC40116, written exactly as the register writes it. It is not one of the three we put into words, so we leave it in the register's own terms.

Product type
Qualification
Training package
PMC — Manufactured Mineral Products
Currency period ends
6 November 2018
Latest release
Release 1 · 22 June 2016
Supersedes
PMC40110
Superseded by
nothing — no replacement listed

Where the register points next

training.gov.au does not publish a supersession path from PMC40116. There is no chain to follow from here.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • PMC40110PMC40116equivalent21 June 2016

    The register records this supersession but attaches no note on what changed.

Is PMC40116 on your scope?

This page is the register's record of one product. What it cannot tell you is whether PMC40116 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What PMC40116 is made of

training.gov.au lists 149 units for PMC40116: 6 core and 143 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 6 listed

CodeUnitIn this product
MSMENV272Participate in environmentally sustainable work practicescurrent
MSMSUP100Apply workplace context to own jobcurrent
MSMSUP101Clean workplace or equipmentcurrent
MSMSUP102Communicate in the workplacecurrent
MSMSUP200Achieve work outcomescurrent
MSMWHS200Work safelycurrent

Elective units 143 listed

CodeUnitIn this product
MEM09002BInterpret technical drawingnot current
MSAPMSUP201AReceive or despatch goodscurrent
MSL952001Collect routine site samplesnot current
MSL973001Perform basic testsnot current
MSL974005Perform physical testsnot current
MSMENV472Implement and monitor environmentally sustainable work practicescurrent
MSMOPS100Use equipmentcurrent
MSMOPS101Make measurementscurrent
MSMOPS200Operate equipmentcurrent
MSMOPS212Use organisation computers or data systemscurrent
MSMOPS400Optimise process/plant areacurrent
MSMOPS401Trial new process or productcurrent
MSMPER200Work in accordance with an issued permitcurrent
MSMPER201Monitor and control work permitscurrent
MSMPER202Observe permit workcurrent
MSMPER205Enter confined spacecurrent
MSMPER300Issue work permitscurrent
MSMPER400Coordinate permit processcurrent
MSMSUP106Work in a teamcurrent
MSMSUP210Process and record informationcurrent
MSMSUP230Monitor process operationscurrent
MSMSUP240Undertake minor maintenancecurrent
MSMSUP280Manage conflict at workcurrent
MSMSUP292Sample and test materials and productcurrent
MSMSUP300Identify and apply process improvementscurrent
MSMSUP303Identify equipment faultscurrent
MSMSUP310Contribute to the development of workplace documentationcurrent
MSMSUP330Develop and adjust a production schedulecurrent
MSMSUP382Provide coaching/mentoring in the workplacecurrent
MSMSUP390Use structured problem-solving toolscurrent
Show the remaining 113 elective units
CodeUnitIn this product
MSMSUP404Coordinate maintenancecurrent
MSMSUP405Identify problems in fluid power systemcurrent
MSMSUP406Identify faults in electronic controlcurrent
MSMWHS300Facilitate the implementation of WHS for a work groupcurrent
MSMWHS400Contribute to WHS management systemcurrent
MSMWHS401Assess riskcurrent
MSS402030Apply cost factors to work practicesnot current
MSS402031Interpret product costs in terms of customer requirementsnot current
MSS402040Apply 5S proceduresnot current
MSS402050Monitor process capabilitynot current
MSS402051Apply quality standardsnot current
MSS402060Use planning software systems in operationsnot current
MSS402080Undertake root cause analysisnot current
MSS402081Contribute to the application of a proactive maintenance strategynot current
MSS403002Ensure process improvements are sustainednot current
MSS403011Facilitate implementation of competitive systems and practicesnot current
MSS403013Lead team culture improvementnot current
MSS403030Improve cost factors in work practicesnot current
MSS403040Facilitate and improve implementation of 5Snot current
MSS403041Facilitate breakthrough improvementsnot current
MSS403051Mistake proof an operational processnot current
MSS404050Undertake process capability improvementsnot current
MSS404052Apply statistics to operational processesnot current
MSS404060Facilitate the use of planning software systems in a work area or teamnot current
MSS404081Undertake proactive maintenance analysesnot current
MSS404082Assist in implementing a proactive maintenance strategynot current
PMAOPS101Read dials and indicatorscurrent
PMAOPS105Select and prepare materialscurrent
PMAOPS216Operate local control systemcurrent
PMAOPS305Operate process control systemsnot current
PMAOPS402Respond to abnormal process situationscurrent
PMAOPS405Operate complex control systemscurrent
PMASUP420Minimise environmental impact of processcurrent
PMBHAN103Shift materials safely by handnot current
PMC552002Operate equipment to blend/mix materialsnot current
PMC552003Operate grinding equipmentnot current
PMC552004Prepare for productionnot current
PMC552005Process greenware/green productsnot current
PMC552006Operate an autoclavenot current
PMC552007Heat accelerate the curing of precast concretenot current
PMC552008Operate crushing equipmentnot current
PMC552010Operate a calcining kilnnot current
PMC552020Operate slip casting equipmentnot current
PMC552021Operate manual glazing equipmentnot current
PMC552022Prepare materials for clay and ceramic productionnot current
PMC552023Finish products after firingnot current
PMC552024Hand mould productsnot current
PMC552030Operate a firing kilnnot current
PMC552031Operate extrusion equipmentnot current
PMC552032Operate pressing equipmentnot current
PMC552040Operate glass melting processnot current
PMC552041Operate process ovensnot current
PMC552042Operate blown insulation equipmentnot current
PMC552043Operate float forming equipmentnot current
PMC552044Operate fibre forming equipmentnot current
PMC552045Operate container forming equipmentnot current
PMC552046Operate glass printing equipmentnot current
PMC552047Operate primary annealing equipmentnot current
PMC552048Operate glass finishing equipmentnot current
PMC552049Operate on-line stacking and assembly equipmentnot current
PMC552050Schedule, cut and bend reinforcementnot current
PMC552051Finish green concrete productsnot current
PMC552052Cast moulded concrete productsnot current
PMC552053Finish cured concrete productsnot current
PMC552054Spin concrete pipesnot current
PMC552055Conduct benching operationsnot current
PMC552056Assemble, fabricate and place reinforcementnot current
PMC552057Finish casting operationnot current
PMC552058Demould concrete productsnot current
PMC552060Batch mix concretenot current
PMC552061Deliver concrete to sitenot current
PMC552065Prepare asphaltnot current
PMC552070Operate forming equipmentnot current
PMC552072Produce fibrous plasterboardnot current
PMC552090Use and maintain tools and equipment for refractory operationsnot current
PMC552091Prepare for, install and repair refractory brickwork/blockworknot current
PMC552092Prepare for and install mouldable refractory materialsnot current
PMC552093Prepare for and cast refractory materialsnot current
PMC552094Prepare for and apply shotcrete for installationnot current
PMC552095Prepare for, install and repair ceramic fibrenot current
PMC553000Set up and tune a processnot current
PMC553010Process raw meal into productnot current
PMC553020Prepare moulds and diesnot current
PMC553021Set up and tune glazing equipmentnot current
PMC553040Set up and optimise glass forming processnot current
PMC553041Set up and optimise glass furnace processnot current
PMC553042Set up and optimise secondary processnot current
PMC553050Produce architectural precast concretenot current
PMC553051Produce structural precast concretenot current
PMC553070Design and construct moulds for fibrous plaster productsnot current
PMC553072Model fibrous plaster productsnot current
PMC553080Set up and optimise finishing processnot current
PMC554020Design and prepare models, moulds and diesnot current
PMC554090Undertake simple refractory designnot current
PMC554091Analyse refractory failuresnot current
PMC561072Store materials for productionnot current
PMC561080Organise selfnot current
PMC562070Move materialsnot current
PMC562071Operate bulk materials handling equipmentnot current
PMC562081Deliver customer servicenot current
PMC562083Allocate and complete team tasksnot current
PMC563081Carry out stock controlnot current
PSPPM402BManage simple projectsnot current
RIIRIS201DConduct local risk controlnot current
TAEASS301Contribute to assessmentnot current
TAEASS401Plan assessment activities and processesnot current
TAEASS402Assess competencenot current
TAEASS403Participate in assessment validationnot current
TAEASS502Design and develop assessment toolsnot current
TAEDEL301Provide work skill instructionnot current
TLIC3003Drive medium rigid vehiclecurrent
TLIC3004Drive heavy rigid vehiclecurrent
TLID2010Operate a forkliftnot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every PMC training product on the register · Search all training products

Is PMC40116 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.