SIT10212 Certificate I in Hospitality

Supersededtraining.gov.au: supersededEquivalent

The currency period for SIT10212 ended on 9 October 2013 — 13 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 11 October 2014. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
SIT12 — Tourism, Travel and Hospitality Training Package
Currency period ends
9 October 2013
Latest release
Release 1 · 18 January 2013
Supersedes
SIT10207
Superseded by
SIT10213 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. SIT10212Superseded — equivalentCertificate I in Hospitality
  2. equivalent
  3. SIT10213Superseded — equivalentCertificate I in Hospitality
  4. equivalent
  5. SIT10216Superseded — equivalentCertificate I in Hospitality
  6. equivalent
  7. SIT10222CurrentCertificate I in Hospitality

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • SIT10207SIT10212equivalent17 January 2013

    Overall intent of the qualification remains unchanged, though qualification is now broader, covering outcomes of previous qualification SIT10307 Certificate I in Hospitality (Kitchen Operations). Total number of units reduced by 1. Core units reduced from 5 to 4 units. Content changed to more accurately reflect the limited hospitality job outcomes at Certificate I level.

  • SIT10212SIT10213equivalent10 October 2013

    Intent of the qualification remains unchanged. SITHIND101 Use hygienic practices for hospitality service added to Group A Elective group. SITXFSA101 Use hygienic practices for food safety moved to Group A Elective group Core units reduced from 4 to 3 units. Elective units increased from 2 to 3 units.

Official documents on the register

What training.gov.au lists for SIT10212 and for its training package SIT12 (release 2.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • SIT10212_R1.pdfSIT10212 release 1 · product document · published 20 January 2013
  • SIT10212_R1.docxSIT10212 release 1 · product document · published 26 November 2024

Is SIT10212 on your scope?

This page is the register's record of one product. What it cannot tell you is whether SIT10212 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What SIT10212 is made of

training.gov.au lists 15 units for SIT10212: 4 core and 11 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 4 listed

CodeUnitIn this product
BSBWOR203BWork effectively with othersnot current
SITXCCS101Provide information and assistancenot current
SITXFSA101Use hygienic practices for food safetynot current
SITXWHS101Participate in safe work practicesnot current

Elective units 11 listed

CodeUnitIn this product
BSBWOR202AOrganise and complete daily work activitiesnot current
CPPCLO1040APrepare for work in the cleaning industrynot current
SITHACS101Clean premises and equipmentnot current
SITHCCC101Use food preparation equipmentnot current
SITHCCC102Prepare simple dishesnot current
SITHCCC103Prepare sandwichesnot current
SITHCCC104Package prepared foodstuffsnot current
SITHFAB101Clean and tidy bar areasnot current
SITHKOP101Clean kitchen premises and equipmentnot current
SITXCOM101Source and present informationnot current
TLIE1005ACarry out basic workplace calculationsnot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 13 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every SIT training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is SIT10212 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.