Can an RTO still enrol new students in SIT10207?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 18 January 2014. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in SIT10207?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

SIT10207 Certificate I in Hospitality

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

SIT10207Superseded — equivalentCertificate I in Hospitality
equivalent
SIT10212Superseded — equivalentCertificate I in Hospitality
equivalent
SIT10213Superseded — equivalentCertificate I in Hospitality
equivalent
SIT10216Superseded — equivalentCertificate I in Hospitality
equivalent
SIT10222CurrentCertificate I in Hospitality

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

THH11002SIT10207equivalent31 December 2010
The register records this supersession but attaches no note on what changed.
SIT10207SIT10212equivalent17 January 2013
Overall intent of the qualification remains unchanged, though qualification is now broader, covering outcomes of previous qualification SIT10307 Certificate I in Hospitality (Kitchen Operations). Total number of units reduced by 1. Core units reduced from 5 to 4 units. Content changed to more accurately reflect the limited hospitality job outcomes at Certificate I level.

Official documents on the register

What training.gov.au lists for SIT10207 and for its training package SIT07 (release 3.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

SIT10207_R1.docxSIT10207 release 1 · product document · published 26 November 2024
SIT10207_R1.pdfSIT10207 release 1 · product document · published 20 July 2012

Is SIT10207 on your scope?

This page is the register's record of one product. What it cannot tell you is whether SIT10207 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What SIT10207 is made of

training.gov.au lists 22 units for SIT10207. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 22 listed

Code	Unit	Core or elective	In this product
SIRXCCS001A	Apply point-of-sale handling procedures	`N/A`	not current
SITHACS003A	Provide porter services	`N/A`	not current
SITHACS004B	Provide housekeeping services to guests	`N/A`	not current
SITHACS005B	Prepare rooms for guests	`N/A`	not current
SITHACS006B	Clean premises and equipment	`N/A`	not current
SITHACS007B	Launder linen and guest clothes	`N/A`	not current
SITHFAB001C	Clean and tidy bar areas	`N/A`	not current
SITHFAB002C	Operate a bar	`N/A`	not current
SITHFAB003A	Serve food and beverage to customers	`N/A`	not current
SITHFAB005A	Provide table service of alcoholic beverages	`N/A`	not current
SITHFAB009A	Provide responsible service of alcohol	`N/A`	not current
SITHFAB010C	Prepare and serve non alcoholic beverages	`N/A`	not current
SITHFAB012B	Prepare and serve espresso coffee	`N/A`	not current
SITHIND001B	Develop and update hospitality industry knowledge	`N/A`	not current
SITXCCS001B	Provide visitor information	`N/A`	not current
SITXCOM001A	Work with colleagues and customers	`N/A`	not current
SITXCOM002A	Work in a socially diverse environment	`N/A`	not current
SITXFIN001A	Process financial transactions	`N/A`	not current
SITXINV001A	Receive and store stock	`N/A`	not current
SITXOHS001B	Follow health, safety and security procedures	`N/A`	not current
SITXOHS002A	Follow workplace hygiene procedures	`N/A`	not current
TLIE507C	Carry out basic workplace calculations	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every SIT training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is SIT10207 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.