TLID307E Handle dangerous goods/hazardous substances

Supersededtraining.gov.au: supersededEquivalent

The currency period for TLID307E ended on 5 March 2011 — 15 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 7 March 2012. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Unit of competency
Training package
TLI07 — Transport and Logistics Training Package (Superseded by TLI10)
Currency period ends
5 March 2011
Latest release
Release 1 · 11 May 2009
Supersedes
TLID307D
Superseded by
TLID2003A equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. TLID307ESuperseded — equivalentHandle dangerous goods/hazardous substances
  2. equivalent
  3. TLID2003ASuperseded — equivalentHandle dangerous goods/hazardous substances
  4. equivalent
  5. TLID2003Superseded — equivalentHandle dangerous goods/hazardous substances
  6. equivalent
  7. TLID0021CurrentStore and handle dangerous goods and hazardous substances

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • TLID307DTLID307Enot equivalent10 May 2009

    The register records this supersession but attaches no note on what changed.

  • TLID307ETLID2003Aequivalent6 March 2011

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for TLID307E and for its training package TLI07 (release 1.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • TLID307E_R1.docxTLID307E release 1 · product document · published 26 November 2024
  • TLID307E_R1.pdfTLID307E release 1 · product document · published 20 July 2012

Is TLID307E on your scope?

This page is the register's record of one product. What it cannot tell you is whether TLID307E sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where TLID307E is used

training.gov.au lists TLID307E inside 20 training products, none of them current. Every one of them is below, with the register's own core or elective flag for TLID307E in that product.

Products no longer current 20 listed

The register still records TLID307E inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

CodeTraining productTypeTLID307E is
FPP20110Certificate II in Pulping OperationsQualificationelective
FPP20210Certificate II in Papermaking OperationsQualificationelective
FPP30110Certificate III in Pulping OperationsQualificationelective
FPP30210Certificate III in Papermaking OperationsQualificationelective
LMF20202Certificate II in Furniture FinishingQualificationelective
LMF21208Certificate II in Stained Glass and Lead LightingQualificationelective
LMF21308Certificate II in CooperingQualificationelective
LMF30202Certificate III in Furniture FinishingQualificationelective
LMF30302Certificate III in Furniture MakingQualificationelective
LMF30502Certificate III in Furniture Making (Wood Machining)Qualificationelective
Show the remaining 10 products no longer current
CodeTraining productTypeTLID307E is
LMF30702Certificate III in Mattress and Base MakingQualificationelective
LMF31002Certificate III in UpholsteryQualificationelective
LMF31102Certificate III in Production UpholsteryQualificationelective
LMF31208Certificate III in Flooring TechnologyQualificationelective
LMF31308Certificate III in CooperingQualificationelective
LMF31408Certificate III in Musical Instrument Making and RepairQualificationelective
LMF31508Certificate III in Piano TechnologyQualificationelective
LMF31708Certificate III in Stained Glass and Lead LightingQualificationelective
LMF31808Certificate III in Blinds and AwningsQualificationelective
LMF32109Certificate III in Cabinet MakingQualificationelective

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every TLI training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is TLID307E still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.