UEE30911 Certificate III in Electronics and Communications

Supersededtraining.gov.au: supersededEquivalent

The currency period for UEE30911 ended on 3 October 2020 — 5 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 5 October 2021 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
UEE11 — Electrotechnology Training Package
Currency period ends
3 October 2020
Latest release
Release 5 · 17 April 2014 · 5 releases in all
Supersedes
UEE30910
Superseded by
UEE30920 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. UEE30911Superseded — equivalentCertificate III in Electronics and Communications
  2. equivalent
  3. UEE30920CurrentCertificate III in Electronics and Communications

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UEE30910UEE30911equivalent15 March 2012

    The register records this supersession but attaches no note on what changed.

  • UEE30911UEE30920equivalent4 October 2020

    The register records this supersession but attaches no note on what changed.

Is UEE30911 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEE30911 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UEE30911 is made of

training.gov.au lists 111 units for UEE30911: 14 core and 97 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 14 listed

CodeUnitIn this product
UEENEEC021BParticipate in electronics and communications work and competency development activitiesnot current
UEENEEE101AApply Occupational Health and Safety regulations, codes and practices in the workplacenot current
UEENEEE102AFabricate, assemble and dismantle utilities industry componentsnot current
UEENEEE104ASolve problems in d.c. circuitsnot current
UEENEEE137ADocument and apply measures to control OHS risks associated with electrotechnology worknot current
UEENEEH102ARepairs basic electronic apparatus faults by replacement of componentsnot current
UEENEEH111ATroubleshoot single phase input d.c. power suppliesnot current
UEENEEH112ATroubleshoot digital sub-systemsnot current
UEENEEH113ATroubleshoot amplifiers in an electronic apparatusnot current
UEENEEH114ATroubleshoot resonance circuits in an electronic apparatusnot current
UEENEEH138AFault find and repair complex power suppliesnot current
UEENEEH139ATroubleshoot basic amplifier circuitsnot current
UEENEEH146ASolve fundamental electronic communications system problemsnot current
UEENEEK142AApply environmentally and sustainable procedures in the energy sectornot current

Elective units 97 listed

CodeUnitIn this product
HLTAID003Provide first aidnot current
HLTAID011Provide First Aidcurrent
ICTTEN3056AInstall telecommunications network equipmentnot current
MSS402001AApply competitive systems and practicesnot current
MSS402020AApply quick changeover proceduresnot current
MSS402021AApply Just in Time proceduresnot current
MSS402040AApply 5S proceduresnot current
MSS402080AUndertake root cause analysisnot current
MSS402081AContribute to the application of a proactive maintenance strategynot current
UEENEEA101AAssemble electronic componentsnot current
UEENEEA102ASelect electronic components for assemblynot current
UEENEEA103ASet up and check electronic component assembly machinesnot current
UEENEEA104AModify electronic sub assembliesnot current
UEENEEA105AConduct quality and functional tests on assembled electronic apparatusnot current
UEENEEA106AUse lead-free soldering techniquesnot current
UEENEEB101AOperate and maintain amateur radio communication stationsnot current
UEENEEC001BMaintain documentationnot current
UEENEEC002BSource and purchase material/parts for installation or service jobsnot current
UEENEEC003BProvide quotations for installation or service jobsnot current
UEENEEC010BDeliver a service to customersnot current
UEENEED101AUse computer applications relevant to a workplacenot current
UEENEED102AAssemble, set-up and test computing devicesnot current
UEENEED104AUse engineering applications software on personal computersnot current
UEENEED112ASupport computer hardware and software for engineering applicationsnot current
UEENEED129ADevelop web pages for engineering applicationsnot current
UEENEED130ASelect, install, configure and test multimedia componentsnot current
UEENEED143AInstall and configure a client computer operating system and softwarenot current
UEENEED146ASet up and configure basic local area network (LAN)not current
UEENEED153ASet up, configure and test biometric devicesnot current
UEENEEE009BComply with scheduled and preventative maintenance program processesnot current
Show the remaining 67 elective units
CodeUnitIn this product
UEENEEE020BProvide basic instruction in the use of electrotechnology apparatusnot current
UEENEEE105AFix and secure electrotechnology equipmentnot current
UEENEEE107AUse drawings, diagrams, schedules, standards, codes and specificationsnot current
UEENEEE108ALay wiring/cabling and terminate accessories for extra-low voltage (ELV) circuitsnot current
UEENEEE121APlan an integrated cabling installation systemnot current
UEENEEE122ACarry out preparatory energy sector work activitiesnot current
UEENEEE123ASolve basic problems electronic and digital equipment and circuitsnot current
UEENEEE179AIdentify and select components, accessories and materials for energy sector work activitiesnot current
UEENEEF102AInstall and maintain cabling for multiple access to telecommunication servicesnot current
UEENEEF104AInstall and modify performance data communication copper cablingnot current
UEENEEF105AInstall and modify optical fibre performance data communication cablingnot current
UEENEEF106ASolve problems in voice and data communications circuitsnot current
UEENEEF107ASet up and configure the wireless capabilities of communications and data storage devicesnot current
UEENEEF108ASelect and arrange equipment for wireless communication networksnot current
UEENEEF109AInstall and connect data and voice communication equipmentnot current
UEENEEF110ASelect and arrange data and voice equipment for local area networksnot current
UEENEEF111ATest, report and rectify faults in data and voice installationsnot current
UEENEEF114ASet up and configure basic data communication systemsnot current
UEENEEH101ARepair basic computer equipment faults by replacement of modules/sub-assembliesnot current
UEENEEH103ARepair routine business equipment faultsnot current
UEENEEH104ASet up and test residential video/audio equipmentnot current
UEENEEH105AVerify functionality and compliance of custom electronic installationsnot current
UEENEEH106AAssemble and set up fixed video/audio components and systems in buildings and premisesnot current
UEENEEH107ARepair predictable faults in general electronic apparatusnot current
UEENEEH108AAssemble and install reception antennae and signal distribution equipmentnot current
UEENEEH109ASet up and test gaming and game equipmentnot current
UEENEEH110AInstall commercial video/audio system componentsnot current
UEENEEH115ADevelop software solutions for microcontroller based systemsnot current
UEENEEH116AFind and repair microwave amplifier section faults in electronic apparatusnot current
UEENEEH117ACarry out repairs of predictable faults in video and audio replay/recording apparatusnot current
UEENEEH118AFault find and repair electronic apparatusnot current
UEENEEH119ARepair predictable faults in television receiversnot current
UEENEEH120AFault find and repair gaming and games equipmentnot current
UEENEEH121AFault find and repair high volume office equipmentnot current
UEENEEH122AFault find and repair remote control apparatusnot current
UEENEEH123AFault find and repair microwave heating apparatusnot current
UEENEEH124ARepair predictable faults in audio componentsnot current
UEENEEH127ASet up and adjust commercial radio frequency (RF) transmission and reception systemsnot current
UEENEEH128AInstall and test microwave antennae and waveguidesnot current
UEENEEH142ASolve oscillator problemsnot current
UEENEEH150AAssemble and set up basic security systemsnot current
UEENEEH151AInstall large security systemsnot current
UEENEEH152AEnter instructions and test wired and wireless security systemsnot current
UEENEEH154AProgram and commission commercial security systemsnot current
UEENEEH155AProgram and commission commercial access control security systemsnot current
UEENEEH156AProgram and commission commercial security closed circuit television systemsnot current
UEENEEH161AInstall fire detection and warning system apparatusnot current
UEENEEH162AVerify compliance and functionality of fire protection system installationsnot current
UEENEEH163AEnter and verify programs for fire protection systemsnot current
UEENEEH164ACommission large fire protection systemsnot current
UEENEEH165ATroubleshoot fire protection systemsnot current
UEENEEH166ATroubleshoot microcontroller based hardware systemsnot current
UEENEEH169ASolve problems in basic electronic circuitsnot current
UEENEEH171ATroubleshoot faults in television receiversnot current
UEENEEH172ATroubleshoot communication systemsnot current
UEENEEH173ATroubleshoot professional audio reproduction componentsnot current
UEENEEH174ATroubleshoot audio - video recording equipmentnot current
UEENEEH187ASolve problems in electronic musical equipment circuitsnot current
UEENEEI101AUse instrumentation drawings, specification, standards and equipment manualsnot current
UEENEEI116AAssemble, enter and verify operating instructions in microprocessor equipped devicesnot current
UEENEEI117ACalibrate, adjust and test measuring instrumentsnot current
UEENEEI150ADevelop, enter and verify discrete control programs for programmable controllersnot current
UEENEEP010ADisconnect - reconnect appliances connected to low voltage installation wiringnot current
UEENEEP012ADisconnect / reconnect composite appliances connected to low voltage installation wiringnot current
UEENEEP017ALocate and rectify faults in low voltage composite appliances using set proceduresnot current
UEENEEP024AAttach cords and plugs to electrical equipment for connection to a single phase 230 Volt supplynot current
UEENEEP025AAttach cords, cables and plugs to electrical equipment for connection to 1000 Va.c. or 1500 Vd.c. supplynot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEE training product on the register · Search all training products

Is UEE30911 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.