Where the register points next
training.gov.au points at nothing after UEE30920: it is the current product, and no replacement is listed.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is UEE30920 on your scope?
This page is the register's record of one product. What it cannot tell you is whether UEE30920 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What UEE30920 is made of
training.gov.au lists 105 units for UEE30920: 14 core and 91 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 14 listed
| Code | Unit | In this product |
|---|---|---|
| UEECD0007 | Apply work health and safety regulations, codes and practices in the workplace | ●current |
| UEECD0016 | Document and apply measures to control WHS risks associated with electrotechnology work | ●current |
| UEECD0019 | Fabricate, assemble and dismantle utilities industry components | ●current |
| UEECD0043 | Solve problems in direct current circuits | ●current |
| UEECO0007 | Participate in electronics and communications work and competency development activities | ●current |
| UEEEC0028 | Fault find and repair complex power supplies | ●current |
| UEEEC0060 | Repairs basic electronic apparatus faults by replacement of components | ●current |
| UEEEC0063 | Solve fundamental electronic communications system problems | ●current |
| UEEEC0066 | Troubleshoot amplifiers in an electronic apparatus | ●current |
| UEEEC0067 | Troubleshoot basic amplifier circuits | ●current |
| UEEEC0069 | Troubleshoot digital sub-systems | ●current |
| UEEEC0074 | Troubleshoot resonance circuits in an electronic apparatus | ●current |
| UEEEC0075 | Troubleshoot single phase input d.c power supplies | ●current |
| UEERE0001 | Apply environmentally and sustainable procedures in the energy sector | ●current |
Elective units 91 listed
| Code | Unit | In this product |
|---|---|---|
| BSBOPS203 | Deliver a service to customers | ●current |
| HLTAID011 | Provide First Aid | ●current |
| ICTICT214 | Operate application software packages | ●current |
| ICTTEN312 | Install telecommunications network equipment | ●current |
| MSS402003 | Apply competitive systems and practices | ●current |
| MSS402022 | Apply quick changeover procedures | ●current |
| MSS402023 | Apply Just in Time procedures | ●current |
| MSS402042 | Apply 5S procedures | ●current |
| MSS402084 | Undertake root cause analysis | ●current |
| MSS402085 | Contribute to the application of a proactive maintenance strategy | ●current |
| UEEAS0001 | Assemble electronic components | ●current |
| UEEAS0002 | Conduct quality and functional tests on assembled electronic apparatus | ●current |
| UEEAS0003 | Modify electronic sub-assemblies | ●current |
| UEEAS0004 | Select electronic components for assembly | ●current |
| UEEAS0005 | Set up and check electronic component assembly machines | ●current |
| UEEAS0006 | Use lead-free soldering techniques | ●current |
| UEECD0008 | Carry out preparatory energy sector work activities | ●current |
| UEECD0011 | Comply with scheduled and preventative maintenance program processes | ●current |
| UEECD0020 | Fix and secure electrotechnology equipment | ●current |
| UEECD0021 | Identify and select components, accessories and materials for energy sector work activities | ●current |
| UEECD0025 | Lay wiring/cabling and terminate accessories for extra-low voltage (ELV) circuits | ●current |
| UEECD0028 | Plan an integrated cabling installation system | ●current |
| UEECD0035 | Provide basic instruction in the use of electrotechnology apparatus | ●current |
| UEECD0040 | Solve basic problems electronic and digital equipment and circuits | ●current |
| UEECD0051 | Use drawings, diagrams, schedules, standards, codes and specifications | ●current |
| UEECO0002 | Maintain documentation | ●current |
| UEECO0015 | Provide quotations for installation or service jobs | ●current |
| UEECO0017 | Source and purchase material/parts for installation or service jobs | ●current |
| UEECS0003 | Assemble, set up and test computing devices | ●current |
| UEECS0018 | Develop web pages for engineering applications | ●current |
Show the remaining 61 elective units
| Code | Unit | In this product |
|---|---|---|
| UEECS0020 | Evaluate and modify object-oriented code programs | ●current |
| UEECS0022 | Install and configure a client computer operating system and software | ●current |
| UEECS0028 | Select, install, configure and test multimedia components | ●current |
| UEECS0029 | Set up and configure basic local area network (LAN) | ●current |
| UEECS0030 | Set up, configure and test biometric devices | ●current |
| UEECS0032 | Support computer hardware and software for engineering applications | ●current |
| UEECS0033 | Use engineering applications software on personal computers | ●current |
| UEEDV0004 | Install and connect data and voice communication equipment | ●current |
| UEEDV0005 | Install and maintain cabling for multiple access to telecommunication services | ●current |
| UEEDV0006 | Install and modify optical fibre performance data communication cabling | ●current |
| UEEDV0008 | Install, modify and verify coaxial and structured communication copper cabling | ●current |
| UEEDV0009 | Select and arrange data and voice equipment for local area networks | ●current |
| UEEDV0010 | Select and arrange equipment for wireless communication networks | ●current |
| UEEDV0011 | Set up and configure basic data communication systems | ●current |
| UEEDV0012 | Set up and configure the wireless capabilities of communications and data storage devices | ●current |
| UEEDV0013 | Solve problems in voice and data communications circuits | ●current |
| UEEDV0014 | Test, report and rectify faults in data and voice installations | ●current |
| UEEEC0002 | Assemble and install reception antennae and signal distribution equipment | ●current |
| UEEEC0003 | Assemble and set up basic security systems | ●current |
| UEEEC0004 | Assemble and set up fixed video/audio components and systems in buildings and premises | ●current |
| UEEEC0006 | Carry out repairs of predictable faults in video and audio replay/recording apparatus | ●current |
| UEEEC0008 | Commission large fire protection systems | ●current |
| UEEEC0019 | Develop software solutions for microcontroller-based systems | ●current |
| UEEEC0026 | Enter and verify programs for fire protection systems | ●current |
| UEEEC0027 | Enter instructions and test wired and wireless security systems | ●current |
| UEEEC0029 | Fault find and repair electronic apparatus | ●current |
| UEEEC0032 | Fault find and repair high-volume office equipment | ●current |
| UEEEC0038 | Find and repair microwave amplifier section faults in electronic apparatus | ●current |
| UEEEC0039 | Install and test microwave antennae and waveguides | ●current |
| UEEEC0040 | Install commercial video/audio system components | ●current |
| UEEEC0041 | Install fire detection and warning system apparatus | ●current |
| UEEEC0042 | Install large security systems | ●current |
| UEEEC0046 | Operate and maintain amateur radio communication stations | ●current |
| UEEEC0048 | Program and commission commercial access control security systems | ●current |
| UEEEC0049 | Program and commission commercial security closed-circuit television systems | ●current |
| UEEEC0050 | Program and commission commercial security systems | ●current |
| UEEEC0055 | Repair basic computer equipment faults by replacement of modules/sub-assemblies | ●current |
| UEEEC0056 | Repair predictable faults in audio components | ●current |
| UEEEC0057 | Repair predictable faults in general electronic apparatus | ●current |
| UEEEC0058 | Repair predictable faults in television receivers | ●current |
| UEEEC0059 | Repair routine business equipment faults | ●current |
| UEEEC0061 | Set up and adjust commercial radio frequency (RF) transmission and reception systems | ●current |
| UEEEC0062 | Set up and test residential video/audio equipment | ●current |
| UEEEC0064 | Solve oscillator problems | ●current |
| UEEEC0065 | Solve problems in basic electronic circuits | ●current |
| UEEEC0068 | Troubleshoot communication systems | ●current |
| UEEEC0070 | Troubleshoot faults in television receivers | ●current |
| UEEEC0071 | Troubleshoot fire protection systems | ●current |
| UEEEC0072 | Troubleshoot microcontroller-based hardware systems | ●current |
| UEEEC0073 | Troubleshoot professional audio reproduction components | ●current |
| UEEEC0076 | Verify compliance and functionality of fire protection system installations | ●current |
| UEEEC0077 | Verify functionality and compliance of custom electronic installations | ●current |
| UEEIC0002 | Assemble, enter and verify operating instructions in microprocessor equipped devices | ●current |
| UEEIC0004 | Calibrate, adjust and test measuring instruments | ●current |
| UEEIC0012 | Develop structured programs to control external devices | ●current |
| UEEIC0013 | Develop, enter and verify discrete control programs for programmable controllers | ●current |
| UEEIC0047 | Use instrumentation drawings, specifications, standards and equipment manuals | ●current |
| UEERL0001 | Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply | ●current |
| UEERL0002 | Attach cords, cables and plugs to electrical equipment for connection to 1000 V a.c. or 1500 V d.c. | ●current |
| UEERL0004 | Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring | ●current |
| UEERL0005 | Locate and rectify faults in low voltage (LV) electrical equipment using set procedures | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every UEE training product on the register · Search all training products
Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day UEE30920 or anything else on it is superseded.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.