UEG50114 Diploma of Gas Supply Industry Operations

Supersededtraining.gov.au: supersededEquivalent

The currency period for UEG50114 ended on 3 September 2018 — 7 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 5 September 2019 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
UEG11 — Gas Industry Training Package
Currency period ends
3 September 2018
Latest release
Release 1 · 13 March 2014
Supersedes
UEG50211
Superseded by
UEG50118 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. UEG50114Superseded — equivalentDiploma of Gas Supply Industry Operations
  2. equivalent
  3. UEG50118Superseded — equivalentDiploma of Gas Supply Industry Operations
  4. equivalent
  5. UEG50120Superseded — not equivalentDiploma of Gas Supply Industry Operations
  6. not equivalent
  7. UEG50122CurrentDiploma of Gas Supply Industry Operations

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UEG50211UEG50114not equivalent12 March 2014

    The register records this supersession but attaches no note on what changed.

  • UEG50114UEG50118equivalent4 September 2018

    The register records this supersession but attaches no note on what changed.

Is UEG50114 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEG50114 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UEG50114 is made of

training.gov.au lists 129 units for UEG50114: 6 core and 123 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 6 listed

CodeUnitIn this product
UEGNSG005APrepare to work in the gas industrynot current
UEGNSG113BManage a utilities industry OHS management systemnot current
UEGNSG120BManage gas system environmental compliancenot current
UEGNSG132ACarry out basic work activities in a gas industry work environmentnot current
UEGNSG133AComply with environmental policies and procedures in the utilities industrynot current
UEGNSG141AApply Workplace Health and Safety regulations, codes and practices in the gas supply industrynot current

Elective units 123 listed

CodeUnitIn this product
BSBCUS501CManage quality customer servicenot current
BSBFLM309CSupport continuous improvement systems and processesnot current
BSBINM501AManage an information or knowledge management systemnot current
BSBINN502ABuild and sustain an innovative work environmentnot current
BSBLED501ADevelop a workplace learning environmentnot current
BSBMGT502BManage people performancenot current
BSBMGT515AManage operational plannot current
BSBMGT516CFacilitate continuous improvementnot current
BSBWHS501AEnsure a safe workplacenot current
BSBWOR501BManage personal work priorities and professional developmentnot current
BSBWOR502BEnsure team effectivenessnot current
PMAOMIR512BEstablish incident response preparedness and response systemsnot current
UEENEEE102AFabricate, assemble and dismantle utilities industry componentsnot current
UEENEEE107AUse drawings, diagrams, schedules, standards, codes and specificationsnot current
UEENEEE117AImplement and monitor energy sector OHS policies and proceduresnot current
UEENEEM020AAttend to breakdowns in hazardous areas - gas atmospheresnot current
UEENEEM076AUse and maintain the integrity of a portable gas detection devicenot current
UEENEEM080AReport on the integrity of explosion-protected equipment in a hazardous areanot current
UEGNSG004ALocate, prove and protect utility assetsnot current
UEGNSG006AUse a portable gas detector to locate escapenot current
UEGNSG106BCoordinate repair of pipeline, facilities and equipmentnot current
UEGNSG108BOperate and monitor pipeline control systemsnot current
UEGNSG109BControl field pipeline operationsnot current
UEGNSG110BSupervise technical operations for gas distribution or transmissionnot current
UEGNSG111BProduce maintenance strategies and plans for a gas facilitynot current
UEGNSG114BCoordinate and monitor implementation of a risk management plan for a utilities industry facilitynot current
UEGNSG115BManage gas systems projectsnot current
UEGNSG116BManage Gas Industry Physical Resourcesnot current
UEGNSG131ACompile a gas industry technical reportnot current
UEGNSG134AEstablish a utilities infrastructure work sitenot current
Show the remaining 93 elective units
CodeUnitIn this product
UEGNSG135AMonitor and control gas odourisationnot current
UEGNSG136ACarry out transmission pipeline construction work activitiesnot current
UEGNSG137AOperate and Maintain Gas Station Water Bath Heatersnot current
UEGNSG138AInstall and commission stationary gas fuelled turbine enginesnot current
UEGNSG139ARepair and maintain stationary gas fuelled turbine enginesnot current
UEGNSG140AApply environmental policies and procedures in the utilities industrynot current
UEGNSG142AConduct isolations under the permit to work system for gas industry work sitesnot current
UEGNSG204BCoordinate and conduct gas distribution pipeline repair and modificationsnot current
UEGNSG207BCoordinate construction, laying and testing of gas distribution pipelinesnot current
UEGNSG210BSupervise and monitor contract staff for work on distribution pipelinesnot current
UEGNSG212BConstruct, lay and connect a gas distribution service to a plastic mainnot current
UEGNSG213BConstruct, lay and connect a gas distribution service to a steel mainnot current
UEGNSG216ACommission or decommission gas distribution pipelinesnot current
UEGNSG217ALaunch and recover PIGs in a gas distribution pipelinenot current
UEGNSG218ACarry out surveillance on gas distribution assetsnot current
UEGNSG219AConduct excavations in the utilities industrynot current
UEGNSG220AConstruct and lay Polyethylene gas distribution mainsnot current
UEGNSG221AFirst on site response to gas pipeline emergenciesnot current
UEGNSG222AConstruct and lay Nylon or PVC gas distribution mainsnot current
UEGNSG223AConstruct and lay steel gas distribution pipelinesnot current
UEGNSG224AConstruct and lay copper and stainless steel gas distribution pipelinesnot current
UEGNSG225APerform routine maintenance on distribution pipeline facilities and equipmentnot current
UEGNSG226AAssist with the construction, laying and connection of gas distribution services to mainsnot current
UEGNSG227AAssist with the construction and laying of gas distribution mainsnot current
UEGNSG228AConstruct and lay large copper gas distribution pipelinesnot current
UEGNSG229APrepare simple drawings of as laid gas mains and servicesnot current
UEGNSG305BCoordinate gas transmission pipeline repair and modificationsnot current
UEGNSG308BIdentify, evaluate and control threats to transmission pipelinesnot current
UEGNSG310BSupervise and monitor contract worknot current
UEGNSG311BSite control of third party works in the vicinity of a transmission pipelinenot current
UEGNSG314BLiaise with third party and the community to maintain pipeline integrity and community safetynot current
UEGNSG319BCustody transfer metering and gas quality analysisnot current
UEGNSG324AFollow company procedures to deal with incidents related to the abuse of drugs and alcoholnot current
UEGNSG325ACoordinate the operation of relevant plant and equipment for transmission pipeline constructionnot current
UEGNSG326ACoordinate and monitor staff and contractorsnot current
UEGNSG327ACoordinate transmission pipeline construction operations not current
UEGNSG330ACoat Metallic Pipelinesnot current
UEGNSG331AEstablish right of way access for transmission pipeline constructionnot current
UEGNSG332AUndertake hydro-testing for transmission pipeline constructionnot current
UEGNSG333AWork in proximity of transmission pipeline construction plant and equipmentnot current
UEGNSG342AMaintain pipeline easementsnot current
UEGNSG344ACommission or decommission gas transmission pipelinesnot current
UEGNSG346ALaunch and recover PIGs in gas transmission pipelinesnot current
UEGNSG347APerform routine maintenance on transmission pipeline facilities and equipmentnot current
UEGNSG348ASupervise the operation of plant and equipment for the construction of gas transmission pipelinesnot current
UEGNSG349ACarry out surveillance of gas transmission pipelinesnot current
UEGNSG350AFirst response to a gas facility eventnot current
UEGNSG352ACheck and report on gas station conditionsnot current
UEGNSG353ACarry out aerial surveillance of gas transmission pipelinesnot current
UEGNSG354AControl excavations in the vicinity of gas transmission pipelinesnot current
UEGNSG355AMonitor and report on cathodic protection systemsnot current
UEGNSG356AMonitor and operate flow control, pressure measuring and regulating devices for gas transmissionnot current
UEGNSG411AMaintain cathodic protection systemsnot current
UEGNSG412AInstall cathodic protection systemsnot current
UEGNSG506ARespond to gas infrastructure emergenciesnot current
UEGNSG507ARemotely monitor and operate gas transmission flow and pressure measuring and regulating devicesnot current
UEGNSG508ARemotely check and report on gas station conditionsnot current
UEGNSG511AOperate gas infrastructure to meet nominated demandnot current
UEGNSG512AControl centre communication with gas industry stakeholdersnot current
UEGNSG513AManage emergencies and critical incidents for gas infrastructurenot current
UEGNSG514AManaging and Controlling Field Activitiesnot current
UEGNSG515AUse control centre systems to monitor and control gas infrastructurenot current
UEGNSG611BControl LPG storage/processing operationsnot current
UEGNSG612BSupervise technical operations for liquefied petroleum gas storage and processingnot current
UEGNSG614ALoad, unload, exchange and connect LPG cylindersnot current
UEGNSG615AFill LPG cylindersnot current
UEGNSG616ARefurbish gas cylindersnot current
UEGNSG617AMonitor and control the transfer of bulk LPGnot current
UEGNSG618AProcess Liquefied Petroleum Gas (LPG)not current
UEGNSG619APerform scheduled maintenance on gas processing or storage facilities and equipmentnot current
UEGNSG620AOrganise the repair of faults in LPG processing or storage facilities and equipmentnot current
UEGNSG621AControl bulk storage of LPGnot current
UEGNSG622AAssess the operational capability of gas safety equipment on a delivery vehiclenot current
UEGNSG705ADisconnect and reconnect small capacity gas metersnot current
UEGNSG706ATest New Residential and Small Commercial Gas Installationsnot current
UEGNSG708APressure Test Residential and Small Commercial Gas Installationsnot current
UEGNSG711AProcess meter reading information using appropriate technologynot current
UEGNSG712ARead and record meter readingsnot current
UEGNSG713AInvestigate billing exceptions-conditionsnot current
UEGNSG714ARelight Type A gas appliancesnot current
UEGNSG804AMaintain Single Stage and Single Run Gas Flow and Pressure Control and Measuring Devicesnot current
UEGNSG805AMaintain Multi-Stage and Multi-Run Gas Flow and Pressure Measuring and Regulating Devicesnot current
UEGNSG806AMaintain SCADA controlled flow and pressure equipment and electronic gas measurement equipmentnot current
UEGNSG807AInstall Gas Flow, Measuring and Pressure Regulating Devicesnot current
UEGNSG811AMonitor and operate complex flow control, measuring and regulating devices for gas distributionnot current
UEPMNT367AInstall and commission stationary gas fuelled reciprocating enginesnot current
UEPMNT368ARepair and maintain stationary gas fuelled reciprocating enginesnot current
UEPOPS203BOperate and monitor communications systemnot current
UEPOPS205BConduct minor mechanical maintenancenot current
UEPOPS317BOperate and monitor fixed fire protection systemsnot current
UEPOPS336BManage, operate and monitor a gas turbine unitnot current
UEPOPS347BOperate and monitor supervisory, control and data acquisition systemsnot current
UETTDREL14AWorking safely near live electrical apparatus as a non-electrical workernot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEG training product on the register · Search all training products

Is UEG50114 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.