When must new enrolments into UEG50211 stop?

New enrolments are not permitted from 13 March 2015 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in UEG50211?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

UEG50211 Diploma of Gas Supply Industry Operations

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

UEG50211Superseded — not equivalentDiploma of Gas Supply Industry Operations
not equivalent
UEG50114Superseded — equivalentDiploma of Gas Supply Industry Operations
equivalent
UEG50118Superseded — equivalentDiploma of Gas Supply Industry Operations
equivalent
UEG50120Superseded — not equivalentDiploma of Gas Supply Industry Operations
not equivalent
UEG50122CurrentDiploma of Gas Supply Industry Operations

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

UEG50211UEG50114not equivalent12 March 2014
The register records this supersession but attaches no note on what changed.

Is UEG50211 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEG50211 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UEG50211 is made of

training.gov.au lists 82 units for UEG50211: 0 core and 3 elective, and 79 units it marks neither. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Elective units 3 listed

Code	Unit	In this product
BSBWHS501A	Ensure a safe workplace	not current
UEENEEE117A	Implement and monitor energy sector OHS policies and procedures	not current
UETTDREL15A	Respond to power systems technical enquiries and requests	not current

Units the register marks neither core nor elective 79 listed

Code	Unit	Core or elective	In this product
BSBCUS501C	Manage quality customer service	`N/A`	not current
BSBFLM309C	Support continuous improvement systems and processes	`N/A`	not current
BSBINM501A	Manage an information or knowledge management system	`N/A`	not current
BSBINN502A	Build and sustain an innovative work environment	`N/A`	not current
BSBLED501A	Develop a workplace learning environment	`N/A`	not current
BSBMGT502B	Manage people performance	`N/A`	not current
BSBMGT515A	Manage operational plan	`N/A`	not current
BSBMGT516C	Facilitate continuous improvement	`N/A`	not current
BSBWOR501B	Manage personal work priorities and professional development	`N/A`	not current
BSBWOR502B	Ensure team effectiveness	`N/A`	not current
UEENEEE101A	Apply Occupational Health and Safety regulations, codes and practices in the workplace	`N/A`	not current
UEENEEM020A	Attend to breakdowns in hazardous areas - gas atmospheres	`N/A`	not current
UEENEEM076A	Use and maintain the integrity of a portable gas detection device	`N/A`	not current
UEENEEM080A	Report on the integrity of explosion-protected equipment in a hazardous area	`N/A`	not current
UEGNSG102B	Carry out work activities in a utilities industry work environment	`N/A`	not current
UEGNSG104B	Comply with environmental policies and procedures	`N/A`	not current
UEGNSG105B	Establish the work site	`N/A`	not current
UEGNSG106B	Coordinate repair of pipeline, facilities and equipment	`N/A`	not current
UEGNSG107B	Control gas odourisation	`N/A`	not current
UEGNSG108B	Operate and monitor pipeline control systems	`N/A`	not current
UEGNSG109B	Control field pipeline operations	`N/A`	not current
UEGNSG110B	Supervise technical operations for gas distribution or transmission	`N/A`	not current
UEGNSG111B	Produce maintenance strategies and plans for a gas facility	`N/A`	not current
UEGNSG112B	Conduct isolation procedures for permit to work system for a gas industry work site	`N/A`	not current
UEGNSG113B	Manage a utilities industry OHS management system	`N/A`	not current
UEGNSG114B	Coordinate and monitor implementation of a risk management plan for a utilities industry facility	`N/A`	not current
UEGNSG115B	Manage gas systems projects	`N/A`	not current
UEGNSG116B	Manage Gas Industry Physical Resources	`N/A`	not current
UEGNSG120B	Manage gas system environmental compliance	`N/A`	not current
UEGNSG125A	Carry out transmission pipeline construction work activities	`N/A`	not current

Show the remaining 49 units

Code	Unit	Core or elective	In this product
UEGNSG131A	Compile a gas industry technical report	`N/A`	not current
UEGNSG202B	Construct and lay distribution pipelines and services	`N/A`	not current
UEGNSG203B	Commission or decommission gas distribution pipelines	`N/A`	not current
UEGNSG204B	Coordinate and conduct gas distribution pipeline repair and modifications	`N/A`	not current
UEGNSG205B	Launch and recover PIG in a gas distribution pipeline	`N/A`	not current
UEGNSG206B	Perform routine maintenance on distribution pipeline facilities and equipment	`N/A`	not current
UEGNSG207B	Coordinate construction, laying and testing of gas distribution pipelines	`N/A`	not current
UEGNSG208B	Gas distribution pipeline surveillance	`N/A`	not current
UEGNSG210B	Supervise and monitor contract staff for work on distribution pipelines	`N/A`	not current
UEGNSG215A	Conduct excavations in the gas industry	`N/A`	not current
UEGNSG304B	Commission or decommission gas transmission pipelines	`N/A`	not current
UEGNSG305B	Coordinate gas transmission pipeline repair and modifications	`N/A`	not current
UEGNSG306B	Pipeline pigging in gas transmission pipeline	`N/A`	not current
UEGNSG307B	Perform routine maintenance on transmission pipeline facilities and equipment	`N/A`	not current
UEGNSG308B	Identify, evaluate and control threats to transmission pipelines	`N/A`	not current
UEGNSG309B	First on site emergency response on a transmission pipeline	`N/A`	not current
UEGNSG310B	Supervise and monitor contract work	`N/A`	not current
UEGNSG311B	Site control of third party works in the vicinity of a transmission pipeline	`N/A`	not current
UEGNSG312B	First response to a facility event	`N/A`	not current
UEGNSG313B	Check and report on station conditions	`N/A`	not current
UEGNSG314B	Liaise with third party and the community to maintain pipeline integrity and community safety	`N/A`	not current
UEGNSG315B	Aerial transmission pipeline surveillance	`N/A`	not current
UEGNSG316B	Site control of excavations in the vicinity of a transmission pipeline	`N/A`	not current
UEGNSG317B	Monitor and report on cathodic protection systems	`N/A`	not current
UEGNSG318B	Monitor and operate flow control, pressure, measuring and regulating devices for gas transmission	`N/A`	not current
UEGNSG319B	Custody transfer metering and gas quality analysis	`N/A`	not current
UEGNSG320A	Establish right of way access for transmission pipeline construction	`N/A`	not current
UEGNSG324A	Follow company procedures to deal with incidents related to the abuse of drugs and alcohol	`N/A`	not current
UEGNSG325A	Coordinate the operation of relevant plant and equipment for transmission pipeline construction	`N/A`	not current
UEGNSG326A	Coordinate and monitor staff and contractors	`N/A`	not current
UEGNSG327A	Coordinate transmission pipeline construction operations	`N/A`	not current
UEGNSG328A	Supervise the operation of plant and equipment for the construction of transmission pipelines	`N/A`	not current
UEGNSG329A	Gas transmission pipeline surveillance	`N/A`	not current
UEGNSG401B	Maintain cathodic protection systems	`N/A`	not current
UEGNSG402B	Install cathodic protection systems	`N/A`	not current
UEGNSG501B	Operate gas infrastructure to meet nominated demand	`N/A`	not current
UEGNSG502B	Control centre communication with gas industry stakeholders	`N/A`	not current
UEGNSG503B	Manage emergencies and critical incidents for gas infrastructure	`N/A`	not current
UEGNSG504B	Monitoring and controlling field activities	`N/A`	not current
UEGNSG505B	Use control centre systems to monitor and control gas infrastructure	`N/A`	not current
UEGNSG606B	Monitor and control the transfer of LPG	`N/A`	not current
UEGNSG607B	Process LPG	`N/A`	not current
UEGNSG608B	Perform minor maintenance on gas processing/storage facilities and equipment	`N/A`	not current
UEGNSG609B	Coordinate repair of faults in gas processing/storage facilities and equipment	`N/A`	not current
UEGNSG610B	Control storage of LPG in terminal	`N/A`	not current
UEGNSG611B	Control LPG storage/processing operations	`N/A`	not current
UEGNSG612B	Supervise technical operations for liquefied petroleum gas storage and processing	`N/A`	not current
UEGNSG703B	Investigate billing exceptions-conditions	`N/A`	not current
UEGNSG801B	Monitor and operate complex flow control, measuring and regulating devices for gas distribution	`N/A`	not current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEG training product on the register · Search all training products

Is UEG50211 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.