UET60109 Advanced Diploma of ESI - Power Systems

Supersededtraining.gov.au: supersededEquivalent

The currency period for UET60109 ended on 29 April 2012 — 14 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 1 May 2013. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
UET09 — Transmission, Distribution and Rail Sector Training Package
Currency period ends
29 April 2012
Latest release
Release 1 · 21 July 2011
Supersedes
UET60106
Superseded by
UET60212 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. UET60109Superseded — equivalentAdvanced Diploma of ESI - Power Systems
  2. equivalent
  3. UET60212Superseded — equivalentAdvanced Diploma of ESI - Power Systems
  4. equivalent
  5. UET60219Superseded — equivalentAdvanced Diploma of ESI - Power Systems
  6. equivalent
  7. UET60221Superseded — not equivalentAdvanced Diploma of ESI - Power Systems
  8. not equivalent
  9. UET60222CurrentAdvanced Diploma of ESI - Power Systems

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UET60106UET60109equivalent20 July 2011

    The register records this supersession but attaches no note on what changed.

  • UET60109UET60212equivalent30 April 2012

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for UET60109 and for its training package UET09 (release 3.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • UET60109_R1.docxUET60109 release 1 · product document · published 26 November 2024
  • UET60109_R1.pdfUET60109 release 1 · product document · published 20 July 2012

Is UET60109 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UET60109 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UET60109 is made of

training.gov.au lists 16 units for UET60109. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 16 listed

CodeUnitCore or electiveIn this product
UEENEED004BUse engineering applications softwareN/Anot current
UEENEEE001BApply OHS practices in the workplaceN/Anot current
UEENEEE002BDismantle, assemble and fabricate electrotechnology componentsN/Anot current
UEENEEE007BUse drawings, diagrams, schedules and manualsN/Anot current
UEENEEE024BCompile and produce an electrotechnology reportN/Anot current
UEENEEG047BProvide computational solutions to power engineering problemsN/Anot current
UEENEEG048BSolve problems in complex multiple path power circuitsN/Anot current
UEENEEG049BSolve problems in complex polyphase power circuitsN/Anot current
UETTDREL01BApply environmental and sustainable energy proceduresN/Anot current
UETTDREL04BWorking safely near live electrical apparatus as non electrical workerN/Anot current
UETTDRIS22BImplement and monitor the organisational OHS policies, procedures and programsN/Anot current
UETTDRIS23BImplement and monitor environmental and sustainable energy management policies and proceduresN/Anot current
UETTDRIS28AAnalyse and develop solutions for problems in extra-low voltage, single path circuitsN/Anot current
UETTDRIS29AAnalyse and develop solutions for problems in multiple path d.c. circuitsN/Anot current
UETTDRIS30AAnalyse and develop solutions for problems in electromagnetic circuitsN/Anot current
UETTDRIS31AAnalyse and develop solutions for problems in single and three phase low voltage circuitsN/Anot current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UET training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is UET60109 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.