BSB30807 Certificate III in Recordkeeping

Supersededtraining.gov.au: supersededEquivalent

The currency period for BSB30807 ended on 23 March 2015 — 11 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 25 March 2016. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
BSB07 — Business Services Training Package
Currency period ends
23 March 2015
Latest release
Release 2 · 28 November 2011 · 2 releases in all
Supersedes
nothing — no earlier product listed
Superseded by
BSB30815 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. BSB30807Superseded — equivalentCertificate III in Recordkeeping
  2. equivalent
  3. BSB30815Superseded — not equivalentCertificate III in Recordkeeping
  4. not equivalent
  5. BSB30120CurrentCertificate III in Business

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • BSB30807BSB30815equivalent24 March 2015

    Updated to meet Standards for Training Packages.

Official documents on the register

What training.gov.au lists for BSB30807 and for its training package BSB07 (release 9.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • BSB30807_R2.pdfBSB30807 release 2 · product document · published 20 July 2012
  • BSB30807_R2.docxBSB30807 release 2 · product document · published 26 November 2024

Is BSB30807 on your scope?

This page is the register's record of one product. What it cannot tell you is whether BSB30807 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What BSB30807 is made of

training.gov.au lists 25 units for BSB30807. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 25 listed

CodeUnitCore or electiveIn this product
BSBADM311AMaintain business resourcesN/Anot current
BSBCMM301BProcess customer complaintsN/Anot current
BSBCUS301BDeliver and monitor a service to customersN/Anot current
BSBDIV301AWork effectively with diversityN/Anot current
BSBFIA301AMaintain financial recordsN/Anot current
BSBINM301AOrganise workplace informationN/Anot current
BSBINM302AUtilise a knowledge management systemN/Anot current
BSBINN201AContribute to workplace innovationN/Anot current
BSBITU301ACreate and use databasesN/Anot current
BSBITU302BCreate electronic presentationsN/Anot current
BSBITU303ADesign and produce text documentsN/Anot current
BSBITU304AProduce spreadsheetsN/Anot current
BSBITU305AConduct online transactionsN/Anot current
BSBITU306ADesign and produce business documentsN/Anot current
BSBITU309AProduce desktop published documentsN/Anot current
BSBPRO301ARecommend products and servicesN/Anot current
BSBRKG301BControl recordsN/Anot current
BSBRKG302BUndertake disposalN/Anot current
BSBRKG303BRetrieve information from recordsN/Anot current
BSBRKG304BMaintain business recordsN/Anot current
BSBRKG305AReview recordkeeping functionsN/Anot current
BSBSUS301AImplement and monitor environmentally sustainable work practicesN/Anot current
BSBWOR301BOrganise personal work priorities and developmentN/Anot current
BSBWOR302AWork effectively as an off site workerN/Anot current
BSBWRT301AWrite simple documentsN/Anot current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every BSB training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is BSB30807 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.