Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is PMC30116 on your scope?
This page is the register's record of one product. What it cannot tell you is whether PMC30116 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What PMC30116 is made of
training.gov.au lists 116 units for PMC30116: 5 core and 111 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 5 listed
Elective units 111 listed
| Code | Unit | In this product |
|---|---|---|
| MEM09002B | Interpret technical drawing | !not current |
| MSL952001 | Collect routine site samples | !not current |
| MSL973001 | Perform basic tests | !not current |
| MSL974005 | Perform physical tests | !not current |
| MSMOPS100 | Use equipment | ●current |
| MSMOPS101 | Make measurements | ●current |
| MSMOPS200 | Operate equipment | ●current |
| MSMOPS212 | Use organisation computers or data systems | ●current |
| MSMPER200 | Work in accordance with an issued permit | ●current |
| MSMPER201 | Monitor and control work permits | ●current |
| MSMPER202 | Observe permit work | ●current |
| MSMPER205 | Enter confined space | ●current |
| MSMPER300 | Issue work permits | ●current |
| MSMSUP106 | Work in a team | ●current |
| MSMSUP200 | Achieve work outcomes | ●current |
| MSMSUP210 | Process and record information | ●current |
| MSMSUP230 | Monitor process operations | ●current |
| MSMSUP240 | Undertake minor maintenance | ●current |
| MSMSUP280 | Manage conflict at work | ●current |
| MSMSUP292 | Sample and test materials and product | ●current |
| MSMSUP300 | Identify and apply process improvements | ●current |
| MSMSUP303 | Identify equipment faults | ●current |
| MSMSUP310 | Contribute to the development of workplace documentation | ●current |
| MSMSUP330 | Develop and adjust a production schedule | ●current |
| MSMSUP382 | Provide coaching/mentoring in the workplace | ●current |
| MSMSUP390 | Use structured problem-solving tools | ●current |
| MSMWHS110 | Follow emergency response procedures | ●current |
| MSMWHS300 | Facilitate the implementation of WHS for a work group | ●current |
| MSS402030 | Apply cost factors to work practices | !not current |
| MSS402031 | Interpret product costs in terms of customer requirements | !not current |
Show the remaining 81 elective units
| Code | Unit | In this product |
|---|---|---|
| MSS402040 | Apply 5S procedures | !not current |
| MSS402050 | Monitor process capability | !not current |
| MSS402051 | Apply quality standards | !not current |
| MSS402060 | Use planning software systems in operations | !not current |
| MSS402080 | Undertake root cause analysis | !not current |
| MSS402081 | Contribute to the application of a proactive maintenance strategy | !not current |
| PMAOPS101 | Read dials and indicators | ●current |
| PMAOPS105 | Select and prepare materials | ●current |
| PMAOPS216 | Operate local control system | ●current |
| PMAOPS305 | Operate process control systems | !not current |
| PMBHAN103 | Shift materials safely by hand | !not current |
| PMC552002 | Operate equipment to blend/mix materials | !not current |
| PMC552003 | Operate grinding equipment | !not current |
| PMC552004 | Prepare for production | !not current |
| PMC552005 | Process greenware/green products | !not current |
| PMC552006 | Operate an autoclave | !not current |
| PMC552007 | Heat accelerate the curing of precast concrete | !not current |
| PMC552008 | Operate crushing equipment | !not current |
| PMC552010 | Operate a calcining kiln | !not current |
| PMC552020 | Operate slip casting equipment | !not current |
| PMC552021 | Operate manual glazing equipment | !not current |
| PMC552022 | Prepare materials for clay and ceramic production | !not current |
| PMC552023 | Finish products after firing | !not current |
| PMC552024 | Hand mould products | !not current |
| PMC552030 | Operate a firing kiln | !not current |
| PMC552031 | Operate extrusion equipment | !not current |
| PMC552032 | Operate pressing equipment | !not current |
| PMC552040 | Operate glass melting process | !not current |
| PMC552041 | Operate process ovens | !not current |
| PMC552042 | Operate blown insulation equipment | !not current |
| PMC552043 | Operate float forming equipment | !not current |
| PMC552044 | Operate fibre forming equipment | !not current |
| PMC552045 | Operate container forming equipment | !not current |
| PMC552046 | Operate glass printing equipment | !not current |
| PMC552047 | Operate primary annealing equipment | !not current |
| PMC552048 | Operate glass finishing equipment | !not current |
| PMC552049 | Operate on-line stacking and assembly equipment | !not current |
| PMC552050 | Schedule, cut and bend reinforcement | !not current |
| PMC552051 | Finish green concrete products | !not current |
| PMC552052 | Cast moulded concrete products | !not current |
| PMC552053 | Finish cured concrete products | !not current |
| PMC552054 | Spin concrete pipes | !not current |
| PMC552055 | Conduct benching operations | !not current |
| PMC552056 | Assemble, fabricate and place reinforcement | !not current |
| PMC552057 | Finish casting operation | !not current |
| PMC552058 | Demould concrete products | !not current |
| PMC552060 | Batch mix concrete | !not current |
| PMC552061 | Deliver concrete to site | !not current |
| PMC552065 | Prepare asphalt | !not current |
| PMC552070 | Operate forming equipment | !not current |
| PMC552072 | Produce fibrous plasterboard | !not current |
| PMC552090 | Use and maintain tools and equipment for refractory operations | !not current |
| PMC552091 | Prepare for, install and repair refractory brickwork/blockwork | !not current |
| PMC552092 | Prepare for and install mouldable refractory materials | !not current |
| PMC552093 | Prepare for and cast refractory materials | !not current |
| PMC552094 | Prepare for and apply shotcrete for installation | !not current |
| PMC553000 | Set up and tune a process | !not current |
| PMC553010 | Process raw meal into product | !not current |
| PMC553020 | Prepare moulds and dies | !not current |
| PMC553021 | Set up and tune glazing equipment | !not current |
| PMC553040 | Set up and optimise glass forming process | !not current |
| PMC553041 | Set up and optimise glass furnace process | !not current |
| PMC553042 | Set up and optimise secondary process | !not current |
| PMC553050 | Produce architectural precast concrete | !not current |
| PMC553051 | Produce structural precast concrete | !not current |
| PMC553070 | Design and construct moulds for fibrous plaster products | !not current |
| PMC553072 | Model fibrous plaster products | !not current |
| PMC553080 | Set up and optimise finishing process | !not current |
| PMC561072 | Store materials for production | !not current |
| PMC561080 | Organise self | !not current |
| PMC562070 | Move materials | !not current |
| PMC562071 | Operate bulk materials handling equipment | !not current |
| PMC562081 | Deliver customer service | !not current |
| PMC562083 | Allocate and complete team tasks | !not current |
| PMC563081 | Carry out stock control | !not current |
| RIIRIS201D | Conduct local risk control | !not current |
| TAEASS301 | Contribute to assessment | !not current |
| TAEDEL301 | Provide work skill instruction | !not current |
| TLIC3003 | Drive medium rigid vehicle | ●current |
| TLIC3004 | Drive heavy rigid vehicle | ●current |
| TLID2010 | Operate a forklift | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every PMC training product on the register · Search all training products
Is PMC30116 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.