TLI10410 Certificate I in Transport and Logistics (Rail Operations)

Supersededtraining.gov.au: supersededNonEquivalent

The currency period for TLI10410 ended on 22 December 2013 — 12 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 24 December 2014 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
TLI10 — TRANSPORT AND LOGISTICS TRAINING PACKAGE
Currency period ends
22 December 2013
Latest release
Release 2 · 2 February 2012 · 2 releases in all
Supersedes
TLI10407
Superseded by
TLI22313 not equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. TLI10410Superseded — not equivalentCertificate I in Transport and Logistics (Rail Operations)
  2. not equivalent
  3. TLI22313Superseded — equivalentCertificate II in Rail Customer Service
  4. equivalent
  5. TLI22315Superseded — equivalentCertificate II in Rail Customer Service
  6. equivalent
  7. TLI22318Superseded — not equivalentCertificate II in Rail Customer Service
  8. not equivalent
  9. TLI22321CurrentCertificate II in Rail Customer Service

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • TLI10407TLI10410equivalent6 March 2011

    The register records this supersession but attaches no note on what changed.

  • TLI10410TLI22313not equivalent23 December 2013

    Not equivalent

Is TLI10410 on your scope?

This page is the register's record of one product. What it cannot tell you is whether TLI10410 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What TLI10410 is made of

training.gov.au lists 15 units for TLI10410. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 15 listed

CodeUnitCore or electiveIn this product
TLIA1001ASecure cargoN/Anot current
TLIB1024AClean transportation units and facilities for passenger useN/Anot current
TLIB1028AMaintain and use hand toolsN/Anot current
TLIB1080AUse, clean and maintain towing equipmentN/Anot current
TLID1001AShift materials safely using manual handling methodsN/Anot current
TLID1002AShift a load using manually-operated equipmentN/Anot current
TLIE1003AParticipate in basic workplace communicationN/Anot current
TLIE1005ACarry out basic workplace calculationsN/Anot current
TLIF1001AFollow occupational health and safety proceduresN/Anot current
TLIF1002BConduct housekeeping activitiesN/Anot current
TLIF1009AConduct cleaning operations in enclosed spacesN/Anot current
TLIG1001AWork effectively with othersN/Anot current
TLII1002AApply customer service skillsN/Anot current
TLIL1001AComplete workplace orientation/induction proceduresN/Anot current
TLIO1002AFollow security procedures when working with passengers and personnelN/Anot current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every TLI training product on the register · Search all training products

Is TLI10410 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.