TLID1107C Conduct specialised forklift operations

Supersededtraining.gov.au: supersededEquivalent

The currency period for TLID1107C ended on 5 March 2011 — 15 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 7 March 2012. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Unit of competency
Training package
TLI07 — Transport and Logistics Training Package (Superseded by TLI10)
Currency period ends
5 March 2011
Latest release
Release 1 · 1 February 2010
Supersedes
nothing — no earlier product listed
Superseded by
TLID3011A equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. TLID1107CSuperseded — equivalentConduct specialised forklift operations
  2. equivalent
  3. TLID3011ASuperseded — equivalentConduct specialised forklift operations
  4. equivalent
  5. TLID3011CurrentConduct specialised forklift operations

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • TLID1107CTLID3011Aequivalent6 March 2011

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for TLID1107C and for its training package TLI07 (release 1.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • TLID1107C_R1.pdfTLID1107C release 1 · product document · published 20 July 2012
  • TLID1107C_R1.docxTLID1107C release 1 · product document · published 26 November 2024

Is TLID1107C on your scope?

This page is the register's record of one product. What it cannot tell you is whether TLID1107C sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where TLID1107C is used

training.gov.au lists TLID1107C inside 24 training products, none of them current. Every one of them is below, with the register's own core or elective flag for TLID1107C in that product.

Products no longer current 24 listed

The register still records TLID1107C inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

CodeTraining productTypeTLID1107C is
AUR20408Certificate II in Automotive Electrical TechnologyQualificationelective
AUR20505Certificate II in Automotive Vehicle ServicingQualificationelective
AUR20611Certificate II in MarineQualificationelective
AUR20705Certificate II in Automotive MechanicalQualificationelective
AUR21205Certificate II in Automotive Warehousing/Distribution OperationsQualificationelective
AUR30308Certificate III in Automotive Electrical TechnologyQualificationelective
AUR30405Certificate III in Automotive Mechanical TechnologyQualificationelective
AUR30511Certificate III in MarineQualificationelective
AUR30605Certificate III in Automotive SpecialistQualificationelective
AUR31105Certificate III in Automotive Warehousing/Distribution OperationsQualificationelective
Show the remaining 14 products no longer current
CodeTraining productTypeTLID1107C is
AUR40208Certificate IV in Automotive TechnologyQualificationelective
FPI30105Certificate III in Forest Growing and ManagementQualificationelective
FPI30205Certificate III in Harvesting and HaulageQualificationelective
FPI30305Certificate III in Sawmilling and ProcessingQualificationelective
FPI30405Certificate III in Wood Panel ProductsQualificationelective
FPI30505Certificate III in Timber Manufactured ProductsQualificationelective
FPI30605Certificate III in Timber MerchandisingQualificationelective
FPP20110Certificate II in Pulping OperationsQualificationelective
FPP20210Certificate II in Papermaking OperationsQualificationelective
FPP30110Certificate III in Pulping OperationsQualificationelective
FPP30210Certificate III in Papermaking OperationsQualificationelective
RII30909Certificate III in Civil ConstructionQualificationelective
RII30912Certificate III in Civil ConstructionQualificationelective
RII31409Certificate III in Road Construction and MaintenanceQualificationelective

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every TLI training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is TLID1107C still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.