UEG40222 Certificate IV in Gas Supply Industry Operations

Currenttraining.gov.au: current

Australia's national training register lists UEG40222 as current. It publishes no end date for the currency period.

Product type
Qualification
Training package
UEG — Gas Industry Training Package
Currency period ends
no end date published
Latest release
Release 1 · 9 December 2022
Supersedes
UEG40120, UEG40221
Superseded by
nothing — no replacement listed

Where the register points next

training.gov.au points at nothing after UEG40222: it is the current product, and no replacement is listed.

This product is listed on the National Schedule of Training Product Development: under review by Powering Skills Organisation (UEG Full Training Product Review), expected submission to the Assurance Body 1 March 2028. That is a submission date, not a supersession date: assurance, endorsement and publication follow, so a new version can only reach the register after it.

Source: National Schedule of Training Product Development, training.gov.au (© Commonwealth of Australia), licensed under Creative Commons Attribution 4.0. Excludes the Commonwealth Coat of Arms, trademarks and third-party material. View the Schedule. Schedule read on 25 August 2026 UTC.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UEG40120UEG40222not equivalent8 December 2022

    The register records this supersession but attaches no note on what changed.

  • UEG40221UEG40222not equivalent8 December 2022

    The register records this supersession but attaches no note on what changed.

Is UEG40222 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEG40222 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UEG40222 is made of

training.gov.au lists 146 units for UEG40222: 5 core and 141 elective. To complete it, the register publishes a rule of 5 core units plus 14 electives19 units in all.

Core units 5 listed

CodeUnitIn this product
BSBLDR414Lead team effectivenesscurrent
BSBOPS402Coordinate business operational planscurrent
BSBPEF402Develop personal work prioritiescurrent
UEGNSG002Apply environmental policies and procedures in the gas supply industrycurrent
UEGNSG047Compile a gas industry technical reportcurrent

Elective units 141 listed

CodeUnitIn this product
BSBLDR301Support effective workplace relationshipscurrent
BSBOPS404Implement customer service strategiescurrent
BSBWHS311Assist with maintaining workplace safetycurrent
CPCPCM4012Estimate and cost workcurrent
CPCWHS1001Prepare to work safely in the construction industrycurrent
CPPFES2005Demonstrate first attack firefighting equipmentcurrent
HLTAID009Provide cardiopulmonary resuscitationcurrent
HLTAID011Provide First Aidcurrent
HLTAID013Provide First Aid in remote or isolated sitecurrent
ICTICT214Operate application software packagescurrent
MSL974019Perform chemical tests and proceduresnot current
MSL975040Apply routine chromatographic techniquesnot current
MSL975047Apply complex instrumental techniquesnot current
MSMOPS400Optimise process/plant areacurrent
MSMPER200Work in accordance with an issued permitcurrent
MSMPER201Monitor and control work permitscurrent
MSMPER300Issue work permitscurrent
MSMPER400Coordinate permit processcurrent
MSMPMC400Carry out stock controlcurrent
MSMSUP210Process and record informationcurrent
MSMWHS201Conduct hazard analysiscurrent
MSMWHS205Control minor incidentscurrent
MSMWHS212Undertake first response to fire incidentscurrent
MSMWHS216Operate breathing apparatuscurrent
MSMWHS217Gas test atmospherescurrent
MSS402061Use SCADA systems in operationsnot current
MSS402080Undertake root cause analysisnot current
PMAOMIR210Control evacuation to muster pointcurrent
PMAOMIR346Assess and secure an incident sitecurrent
PMAOMIR407Audit incident preparedness and established response systemscurrent
Show the remaining 111 elective units
CodeUnitIn this product
PMAOMIR418Coordinate incident responsecurrent
PMAOMIR430Conduct and assess incident exercisescurrent
PMAOMIR444Develop incident containment tacticscurrent
PMAOPS223Operate and monitor valve systemscurrent
PMAOPS317Undertake ship transfer operationscurrent
PMAOPS346Operate and troubleshoot liquefaction processcurrent
PMAOPS402Respond to abnormal process situationscurrent
PMAOPS405Operate complex control systemscurrent
PMAOPS410Operate remote production facilitiescurrent
PMASUP410Develop plant documentationcurrent
PMASUP444Plan plant preparation and isolationcurrent
PMAWHS211Prepare equipment for emergency responsecurrent
PMAWHS310Investigate incidentscurrent
PMAWHS311Lead emergency teamscurrent
TLIC0003Operate LP gas tankercurrent
TLID0016Operate a forkliftcurrent
TLID0018Prepare for transport of dangerous goodscurrent
TLID3023Use specialised liquid bulk gas transfer equipmentcurrent
TLID3036Lift and move load using a mobile cranecurrent
TLIF0012Implement and coordinate accident-emergency procedurescurrent
TLIF0014Monitor the safety of transport activities (Chain of Responsibility)not current
TLIF0021Administer the implementation of fatigue management strategiescurrent
TLIF2006Apply accident-emergency procedurescurrent
TLIF2010Apply fatigue management strategiescurrent
TLIF2012Apply safe procedures when handling/transporting dangerous goods or explosivescurrent
TLIF3096Carry out emergency response to a dangerous goods incidentcurrent
TLIF4065Ensure compliance with Australian Dangerous Goods Codecurrent
TLIF4066Implement and supervise transport regulations compliance systemscurrent
TLIL4059Implement asset management systemscurrent
TLILIC0001Licence to transport dangerous goods by roadcurrent
UEECD0024Implement and monitor energy sector WHS policies and procedurescurrent
UEECO0002Maintain documentationcurrent
UEGNSG007Assess the operational capability of gas safety equipment on a delivery vehiclecurrent
UEGNSG011Conduct isolations under the permit to work system for gas industry worksitescurrent
UEGNSG013Construct, lay and connect a gas distribution service to a maincurrent
UEGNSG014Control industrial gas storage/processing operationscurrent
UEGNSG015Coordinate gas transmission pipeline repairs and modificationscurrent
UEGNSG016Establish right of way access and maintain transmission pipeline easementcurrent
UEGNSG021Maintain multi-stage, multi-run pressure control devicescurrent
UEGNSG022Maintain single stage, single run pressure control devicescurrent
UEGNSG024Monitor and control the transfer of bulk industrial gascurrent
UEGNSG025Monitor and operate complex flow control, measuring and regulating devicescurrent
UEGNSG027Perform routine maintenance on transmission pipeline facilities and equipmentcurrent
UEGNSG028Perform scheduled maintenance on gas processing or storage facilities and equipmentcurrent
UEGNSG029Process, mix and blend industrial gasescurrent
UEGNSG030Store and handle bulk industrial gasescurrent
UEGNSG031Prepare to work in the gas industrycurrent
UEGNSG032Carry out aerial surveillance of gas transmission pipelinescurrent
UEGNSG033Carry out basic work activities in a gas industry work environmentcurrent
UEGNSG034Carry out surveillance of gas transmission pipelinescurrent
UEGNSG035Respond to gas infrastructure emergenciescurrent
UEGNSG036Supervise and monitor contract workcurrent
UEGNSG037Supervise technical operations for gas distribution or transmissioncurrent
UEGNSG038Supervise the operation of plant and equipment for the construction of gas transmission pipelinescurrent
UEGNSG040Use a portable detector to locate a combustible gas escapecurrent
UEGNSG041Apply safe working practices in the gas supply industrycurrent
UEGNSG044Repair and maintain stationary gas fuelled turbine enginescurrent
UEGNSG045Carry out surveillance on gas distribution assetscurrent
UEGNSG046Coat metallic pipelinescurrent
UEGNSG048Conduct butt fusion of large diameter polyethylene gas pipeline systemscurrent
UEGNSG049Control excavations in the vicinity of gas transmission pipelinescurrent
UEGNSG050Control field pipeline operationscurrent
UEGNSG051Coordinate repair of pipeline, facilities and equipmentcurrent
UEGNSG053Install and commission stationary gas fuelled turbine enginescurrent
UEGNSG054Install cathodic protection systemscurrent
UEGNSG056Launch and recover PIGs in gas transmission pipelinescurrent
UEGNSG057Liaise with third party and the community to maintain pipeline integrity and community safetycurrent
UEGNSG058Locate, prove and protect utility assetscurrent
UEGNSG059Maintain cathodic protection systemscurrent
UEGNSG060Maintain SCADA controlled flow and pressure equipment and electronic gas measurement equipmentcurrent
UEGNSG061Monitor and control gas odourisationcurrent
UEGNSG062Monitor and report on cathodic protection systemscurrent
UEGNSG063Operate and maintain gas station water bath heaterscurrent
UEGNSG064Operate and monitor pipeline control systemscurrent
UEGNSG202Conduct emergency site control on gas distribution assetscurrent
UEGNSG205Commission or decommission gas distribution pipelinescurrent
UEGNSG208Construct and lay large copper gas distribution pipelinescurrent
UEGNSG211Construct and lay steel gas distribution pipelinescurrent
UEGNSG214Coordinate and conduct gas distribution pipeline repair and modificationscurrent
UEGNSG215Coordinate construction, laying and testing of gas distribution pipelinescurrent
UEGNSG229Prepare simple drawings of as laid gas mains and servicescurrent
UEGNSG301Conduct emergency site control on gas transmission assetscurrent
UEGNSG302Conduct transmission pipeline emergency repaircurrent
UEGNSG303Carry out transmission pipeline construction work activitiescurrent
UEGNSG304Commission or decommission gas transmission pipelinescurrent
UEGNSG306Control gas processing, storage or regasification operations in an LNG storage facilitycurrent
UEGNSG307Coordinate the operation of relevant plant and equipment for transmission pipeline constructioncurrent
UEGNSG309Coordinate transmission pipeline construction operationscurrent
UEGNSG312Inject gas into underground storagecurrent
UEGNSG315Withdraw gas from underground storagecurrent
UEGNSG317First response to a gas facility eventcurrent
UEGNSG326Coordinate and monitor staff and contractorscurrent
UEGNSG501Communicate with gas industry stakeholders to meet operational requirementscurrent
UEGNSG502Implement emergency and critical incident response for gas infrastructure incidentscurrent
UEGNSG503Monitor and control field activitiescurrent
UEGNSG504Monitor and control gas infrastructure using Control Centre systemscurrent
UEGNSG509Remotely monitor and operate gas transmission flow and pressure measuring and regulating devicescurrent
UEGNSG703Fault find and repair data logging equipmentcurrent
UEGNSG704Install and commission data logging equipmentcurrent
UEGNSG707Process data logging informationcurrent
UEGNSG715Use data logging equipmentcurrent
UEGNSG902Commission, operate and maintain electrolyserscurrent
UEGNSG903Fault find and repair hydrogen storage equipmentcurrent
UEGNSG904Inject hydrogen gas into distribution networkscurrent
UEPMNT367Install and commission stationary gas fuelled reciprocating enginescurrent
UEPMNT368Repair and maintain stationary gas fuelled reciprocating enginescurrent
UEPOPS059Manage, operate and monitor a gas turbine unitcurrent
UEPOPS085Operate and monitor communications systemcurrent
UEPOPS092Operate and monitor fixed fire protection systemscurrent
UEPOPS107Operate and monitor supervisory control and data acquisition systemscurrent
UETDREL006Work safely in the vicinity of live electrical apparatus as a non-electrical workercurrent

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEG training product on the register · Search all training products

Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day UEG40222 or anything else on it is superseded.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.