FWP20122 Certificate II in Forest Operations

Currenttraining.gov.au: current

Australia's national training register lists FWP20122 as current. It publishes no end date for the currency period.

Product type
Qualification
Training package
FWP — Forest and Wood Products Training Package
Currency period ends
no end date published
Latest release
Release 3 · 7 April 2026 · 3 releases in all
Supersedes
FWP20121
Superseded by
nothing — no replacement listed

Where the register points next

training.gov.au points at nothing after FWP20122: it is the current product, and no replacement is listed.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • FWP20121FWP20122equivalent24 January 2023

    Added a unit and updated native unit codes that form part of specialisations. New qualification code

Is FWP20122 on your scope?

This page is the register's record of one product. What it cannot tell you is whether FWP20122 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What FWP20122 is made of

training.gov.au lists 75 units for FWP20122: 5 core and 70 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 5 listed

CodeUnitIn this product
FWPCOR2206Work effectively in the forest and wood products industrycurrent
FWPCOR2208Communicate and interact effectively in the forest and wood products industrycurrent
FWPCOR2209Follow environmental protection procedures in forest and wood products operationscurrent
FWPCOR2210Follow workplace health and safety policies and procedures in forest and wood products operationscurrent
FWPCOR2211Develop knowledge of the forest and wood products industrycurrent

Elective units 70 listed

CodeUnitIn this product
AHCARB212Operate and maintain stump grinding machinescurrent
AHCBIO204Follow site biosecurity procedurescurrent
AHCCHM201Apply chemicals under supervisioncurrent
AHCCHM304Transport and store chemicalscurrent
AHCCHM307Prepare and apply chemicals to control pest, weeds and diseasescurrent
AHCINF206Install, maintain and repair farm fencingcurrent
AHCMOM202Operate tractorscurrent
AHCMOM216Operate side by side utility vehiclescurrent
AHCOCM201Maintain cultural sitescurrent
AHCPMG201Treat weedscurrent
AHCPMG202Treat plant pests, diseases and disorderscurrent
AHCSAW203Conduct erosion and sediment control activitiescurrent
AVIY0028Operate remotely piloted aircraft in excluded category sub-2 kg operationscurrent
BSBCRT201Develop and apply thinking and problem solving skillscurrent
BSBPEF202Plan and apply time managementcurrent
BSBWHS211Contribute to the health and safety of self and otherscurrent
FBPOPR2074Carry out manual handling taskscurrent
FSKOCM007Interact effectively with others at workcurrent
FSKRDG007Read and respond to simple workplace informationcurrent
FSKWTG006Write simple workplace informationcurrent
FWPCOT2242Segregate and sort logscurrent
FWPCOT2254Maintain chainsawscurrent
FWPCOT2264Follow quality and product care procedures in forest and wood products operationscurrent
FWPCOT2265Navigate in forest areascurrent
FWPCOT2266Operate brush cuttercurrent
FWPCOT2267Operate mobile hydraulic log splittercurrent
FWPCOT2273Trim and cut felled treescurrent
FWPCOT2275Fell trees manually (basic)current
FWPCOT3270Grade and mark logscurrent
FWPCOT3301Trim trees using a pole sawcurrent
Show the remaining 40 elective units
CodeUnitIn this product
FWPCOT3302Access and provide timber and wood product informationcurrent
FWPCOT3314Comply with soil and water protectioncurrent
FWPCOT3317Use chainsaw within a treecurrent
FWPCOT3318Access, capture and communicate forestry field data using mobile devicescurrent
FWPCOT3319Read and interpret digital maps and forest operation planscurrent
FWPCOT3324Apply cultural heritage protection requirements in forest operationscurrent
FWPCOT3325Operate four wheel drive vehicle on unsealed roadscurrent
FWPCOT3326Recover four wheel drive vehiclecurrent
FWPFIR2001Follow fire prevention procedurescurrent
FWPFIR2002Detect fire in a native forest or plantationcurrent
FWPFIR3002Apply communication protocols during post-bushfire vegetation clearing and clean-up operationscurrent
FWPHAR2201Hook up felled trees (choker)current
FWPHAR2202Perform landing duties (chaser)current
FWPHAR2208Operate a mobile chipper/mulchercurrent
FWPHAR2209Trim and cut harvested treescurrent
FWPHAR2210Operate a forest machine simulator in a virtual environmentcurrent
FWPNSY2001Collect tree seedscurrent
FWPNSY2002Cut, sort and set cuttingscurrent
FWPNSY2003Follow quality procedures in forest nursery productioncurrent
FWPNSY2004Prick out and transplant tree seedlingscurrent
FWPNSY2005Apply tree seed treatmentcurrent
FWPSIL2001Select and mark trees for tending operationscurrent
FWPSIL2002Plant trees by handcurrent
FWPSIL2003Prune treescurrent
FWPSIL2004Collect forest data or samples for assessment and analysiscurrent
FWPSIL2005Measure treescurrent
HLTAID011Provide First Aidcurrent
MSS402003Apply competitive systems and practicescurrent
MSS402004Sustain process improvementscurrent
PUAEQU001Prepare, maintain and test response equipmentcurrent
PUAFIR017Work safely around aircraftcurrent
PUAFIR201Assist with prescribed burningcurrent
PUAFIR204Respond to wildfirecurrent
PUAFIR210Prevent injurycurrent
PUALAW001Protect and preserve incident scenecurrent
PUAOPE013Operate communications systems and equipmentcurrent
PUATEA001Work in a teamcurrent
TLID0007Operate specialised load shifting equipmentcurrent
TLID0020Shift materials safely using manual handling methodscurrent
TLILIC0003Licence to operate a forklift truckcurrent

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every FWP training product on the register · Search all training products

Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day FWP20122 or anything else on it is superseded.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.