UEG40220 Certificate IV in Gas Supply Industry Operations

Supersededtraining.gov.au: supersededEquivalent

The currency period for UEG40220 ended on 21 November 2021 — 4 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 23 November 2022 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
UEG — Gas Industry Training Package
Currency period ends
21 November 2021
Latest release
Release 2 · 21 April 2021 · 2 releases in all
Supersedes
UEG40118
Superseded by
UEG40221 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. UEG40220Superseded — equivalentCertificate IV in Gas Supply Industry Operations
  2. equivalent
  3. UEG40221Superseded — not equivalentCertificate IV in Gas Supply Industry Operations
  4. not equivalent
  5. UEG40222CurrentCertificate IV in Gas Supply Industry Operations

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UEG40118UEG40220equivalent24 January 2021

    The register records this supersession but attaches no note on what changed.

  • UEG40220UEG40221equivalent22 November 2021

    The register records this supersession but attaches no note on what changed.

Is UEG40220 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEG40220 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UEG40220 is made of

training.gov.au lists 233 units for UEG40220: 8 core and 225 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 8 listed

CodeUnitIn this product
BSBLDR414Lead team effectivenesscurrent
BSBOPS402Coordinate business operational planscurrent
BSBPEF402Develop personal work prioritiescurrent
UEECD0024Implement and monitor energy sector WHS policies and procedurescurrent
UEGNSG005Prepare to work in the gas industrynot current
UEGNSG132Carry out basic work activities in a gas industry work environmentnot current
UEGNSG133Comply with environmental policies and procedures in the utilities industrynot current
UEGNSG141Apply workplace health and safety regulations, codes and practices in the gas supply industrynot current

Elective units 225 listed

CodeUnitIn this product
BSBHRM413Support the learning and development of teams and individualscurrent
BSBINS402Coordinate workplace information systemscurrent
BSBLDR301Support effective workplace relationshipscurrent
BSBLDR413Lead effective workplace relationshipscurrent
BSBOPS301Maintain business resourcescurrent
BSBOPS404Implement customer service strategiescurrent
BSBPEF301Organise personal work prioritiescurrent
BSBSTR301Contribute to continuous improvementcurrent
BSBSTR401Promote innovation in team environmentscurrent
BSBSTR402Implement continuous improvementcurrent
BSBWHS308Participate in WHS hazard identification, risk assessment and risk control processescurrent
BSBWHS311Assist with maintaining workplace safetycurrent
BSBXTW301Work in a teamcurrent
CPCCLDG3001Licence to perform doggingcurrent
CPCCLRG3001Licence to perform rigging basic levelcurrent
CPCCLRG3002Licence to perform rigging intermediate levelcurrent
CPCCWHS1001Prepare to work safely in the construction industrynot current
CPCPCM4012Estimate and cost workcurrent
CPPFES2005ADemonstrate first attack firefighting equipmentnot current
HLTAID009Provide cardiopulmonary resuscitationcurrent
HLTAID011Provide First Aidcurrent
HLTAID013Provide First Aid in remote or isolated sitecurrent
HLTWHS005Conduct manual tasks safelycurrent
ICTICT214Operate application software packagescurrent
MEM05004Perform routine oxy fuel gas weldingcurrent
MEM05012Perform routine manual metal arc weldingcurrent
MEM05015Weld using manual metal arc welding processnot current
MEM05045Perform pipe welds to code standards using manual metal arc welding processnot current
MSL974019Perform chemical tests and proceduresnot current
MSL975040Apply routine chromatographic techniquesnot current
Show the remaining 195 elective units
CodeUnitIn this product
MSL975047Apply complex instrumental techniquesnot current
MSMOPS400Optimise process/plant areacurrent
MSMPER200Work in accordance with an issued permitcurrent
MSMPER201Monitor and control work permitscurrent
MSMPER202Observe permit workcurrent
MSMPER300Issue work permitscurrent
MSMPER400Coordinate permit processcurrent
MSMPMC400Carry out stock controlcurrent
MSMSUP210Process and record informationcurrent
MSMSUP240Undertake minor maintenancecurrent
MSMSUP303Identify equipment faultscurrent
MSMWHS110Follow emergency response procedurescurrent
MSMWHS205Control minor incidentscurrent
MSMWHS216Operate breathing apparatuscurrent
MSMWHS217Gas test atmospherescurrent
MSS402061Use SCADA systems in operationsnot current
MSS402080Undertake root cause analysisnot current
PMAOMIR210Control evacuation to muster pointcurrent
PMAOMIR346Assess and secure an incident sitecurrent
PMAOMIR407Audit incident preparedness and established response systemscurrent
PMAOMIR418Coordinate incident responsecurrent
PMAOMIR430Conduct and assess incident exercisescurrent
PMAOMIR444Develop incident containment tacticscurrent
PMAOPS223Operate and monitor valve systemscurrent
PMAOPS317Undertake ship transfer operationscurrent
PMAOPS402Respond to abnormal process situationscurrent
PMAOPS405Operate complex control systemscurrent
PMAOPS410Operate remote production facilitiescurrent
PMASUP410Develop plant documentationcurrent
PMASUP444Plan plant preparation and isolationcurrent
PMAWHS211Prepare equipment for emergency responsecurrent
PMAWHS310Investigate incidentscurrent
PMAWHS311Lead emergency teamscurrent
PMBWELD301Butt weld polyethylene plastic pipelinesnot current
PMBWELD302Electrofusion weld polyethylene pipelinesnot current
RIICCM205ECarry out manual excavationnot current
RIICCM206DSupport plant operationsnot current
RIICCM207DSpread and compact materials manuallynot current
RIICCM208DCarry out basic levellingnot current
RIICCM210DInstall trench supportnot current
RIICRC208DLay pipesnot current
RIIHAN309FConduct telescopic materials handler operationscurrent
RIIMPO304EConduct wheel loader operationscurrent
RIIMPO308FConduct tracked dozer operationscurrent
RIIMPO309FConduct wheeled dozer operationscurrent
RIIMPO318FConduct civil construction skid steer loader operationscurrent
RIIMPO319EConduct backhoe/loader operationscurrent
RIIMPO320FConduct civil construction excavator operationscurrent
RIIRIS301EApply risk management processescurrent
RIISAM201EHandle resources and infrastructure materials and safely dispose of nontoxic materialscurrent
RIIWHS202EEnter and work in confined spacescurrent
RIIWHS204EWork safely at heightscurrent
RIIWHS205EControl traffic with stop-slow batcurrent
RIIWHS302EImplement traffic management planscurrent
RIIWMG203DDrain and dewater civil construction sitenot current
TLIB0002Carry out vehicle inspectioncurrent
TLIC0003Operate LP gas tankercurrent
TLIC2002Drive light rigid vehiclecurrent
TLIC2025Operate four wheel drive vehiclenot current
TLIC3003Drive medium rigid vehiclecurrent
TLIC3004Drive heavy rigid vehiclecurrent
TLIC3005Drive heavy combination vehiclecurrent
TLIC4006Drive multi-combination vehiclecurrent
TLID2003Handle dangerous goods/hazardous substancesnot current
TLID2010Operate a forkliftnot current
TLID2016Load and unload explosives/dangerous goodsnot current
TLID3015Identify and label explosives/dangerous goodscurrent
TLID3023Use specialised liquid bulk gas transfer equipmentcurrent
TLID3027Prepare for transport of dangerous goodsnot current
TLID3033Operate a vehicle-mounted loading cranenot current
TLID3036Lift and move load using a mobile cranecurrent
TLIF0012Implement and coordinate accident-emergency procedurescurrent
TLIF0014Monitor the safety of transport activities (Chain of Responsibility)not current
TLIF2006Apply accident-emergency procedurescurrent
TLIF2010Apply fatigue management strategiescurrent
TLIF2012Apply safe procedures when handling/transporting dangerous goods or explosivescurrent
TLIF3063Administer the implementation of fatigue management strategiesnot current
TLIF3096Carry out emergency response to a dangerous goods incidentcurrent
TLIF4065Ensure compliance with Australian Dangerous Goods Codecurrent
TLIF4066Implement and supervise transport regulations compliance systemscurrent
TLIL4059Implement asset management systemscurrent
TLILIC0001Licence to transport dangerous goods by roadcurrent
TLILIC0002Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above)not current
TLILIC0003Licence to operate a forklift truckcurrent
TLILIC0008Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity)not current
TLILIC0010Licence to operate a slewing mobile crane (up to 20 tonnes)not current
TLILIC0013Licence to operate a slewing mobile crane (up to 60 tonnes)not current
TLILIC2014Licence to drive a light rigid vehiclecurrent
TLILIC2015Licence to drive a medium rigid vehiclecurrent
TLILIC2016Licence to drive a heavy rigid vehiclecurrent
TLILIC3017Licence to drive a heavy combination vehiclecurrent
TLILIC3018Licence to drive a multi-combination vehiclecurrent
UEECD0007Apply work health and safety regulations, codes and practices in the workplacecurrent
UEECD0019Fabricate, assemble and dismantle utilities industry componentscurrent
UEECD0050Use and maintain the integrity of a portable gas detection devicecurrent
UEECD0051Use drawings, diagrams, schedules, standards, codes and specificationscurrent
UEECO0002Maintain documentationcurrent
UEGNSG004Locate, prove and protect utility assetsnot current
UEGNSG006Use a portable gas detector to locate escapenot current
UEGNSG106Coordinate repair of pipeline, facilities and equipmentnot current
UEGNSG108Operate and monitor pipeline control systemsnot current
UEGNSG109Control field pipeline operationsnot current
UEGNSG110Supervise technical operations for gas distribution or transmissionnot current
UEGNSG131Compile a gas industry technical reportnot current
UEGNSG134Establish a utilities infrastructure work sitenot current
UEGNSG135Monitor and control gas odourisationnot current
UEGNSG136Carry out transmission pipeline construction work activitiesnot current
UEGNSG137Operate and maintain gas station water bath heatersnot current
UEGNSG138Install and commission stationary gas fuelled turbine enginesnot current
UEGNSG139Repair and maintain stationary gas fuelled turbine enginesnot current
UEGNSG140Apply environmental policies and procedures in the utilities industrynot current
UEGNSG142Conduct isolations under the permit to work system for gas industry work sitesnot current
UEGNSG200Conduct butt fusion of large diameter polyethylene gas pipeline systemsnot current
UEGNSG201Conduct distribution pipeline emergency repaircurrent
UEGNSG202Conduct emergency site control on gas distribution assetscurrent
UEGNSG203Evaluate and extinguish gas firecurrent
UEGNSG204Coordinate and conduct gas distribution pipeline repair and modificationsnot current
UEGNSG207Coordinate construction, laying and testing of gas distribution pipelinesnot current
UEGNSG210Supervise and monitor contract staff for work on distribution pipelinesnot current
UEGNSG212Construct, lay and connect a gas distribution service to a plastic mainnot current
UEGNSG213Construct, lay and connect a gas distribution service to a steel mainnot current
UEGNSG216Commission or decommission gas distribution pipelinesnot current
UEGNSG217Launch and recover PIGs in a gas distribution pipelinenot current
UEGNSG218Carry out surveillance on gas distribution assetsnot current
UEGNSG219Conduct excavations in the utilities industrynot current
UEGNSG220Construct and lay polyethylene gas distribution mainsnot current
UEGNSG221First on site response to gas pipeline emergenciesnot current
UEGNSG222Construct and lay nylon or PVC gas distribution mainsnot current
UEGNSG223Construct and lay steel gas distribution pipelinesnot current
UEGNSG224Construct and lay copper and stainless steel gas distribution pipelinesnot current
UEGNSG225Perform routine maintenance on distribution pipeline facilities and equipmentnot current
UEGNSG226Assist with the construction, laying and connection of gas distribution services to mainsnot current
UEGNSG227Assist with the construction and laying of gas distribution mainsnot current
UEGNSG228Construct and lay large copper gas distribution pipelinesnot current
UEGNSG229Prepare simple drawings of as laid gas mains and servicescurrent
UEGNSG301Conduct emergency site control on gas transmission assetscurrent
UEGNSG302Conduct transmission pipeline emergency repaircurrent
UEGNSG305Coordinate gas transmission pipeline repairs and modificationsnot current
UEGNSG310Supervise and monitor contract worknot current
UEGNSG314Liaise with third party and the community to maintain pipeline integrity and community safetynot current
UEGNSG325Coordinate the operation of relevant plant and equipment for transmission pipeline constructionnot current
UEGNSG326Coordinate and monitor staff and contractorscurrent
UEGNSG327Coordinate transmission pipeline construction operationsnot current
UEGNSG330Coat metallic pipelinesnot current
UEGNSG331Establish right of way access for transmission pipeline constructionnot current
UEGNSG333Work in proximity of transmission pipeline construction plant and equipmentnot current
UEGNSG342Maintain pipeline easementsnot current
UEGNSG344Commission or decommission gas transmission pipelinesnot current
UEGNSG346Launch and recover PIGs in gas transmission pipelinesnot current
UEGNSG347Perform routine maintenance on transmission pipeline facilities and equipmentnot current
UEGNSG348Supervise the operation of plant and equipment for the construction of gas transmission pipelinesnot current
UEGNSG349Carry out surveillance of gas transmission pipelinesnot current
UEGNSG350First response to a gas facility eventnot current
UEGNSG352Check and report on gas station conditionsnot current
UEGNSG353Carry out aerial surveillance of gas transmission pipelinesnot current
UEGNSG354Control excavations in the vicinity of gas transmission pipelinesnot current
UEGNSG355Monitor and report on cathodic protection systemsnot current
UEGNSG356Monitor and operate flow control, pressure measuring and regulating devices for gas transmissionnot current
UEGNSG411Maintain cathodic protection systemsnot current
UEGNSG412Install cathodic protection systemsnot current
UEGNSG501Communicate with gas industry stakeholders to meet operational requirementscurrent
UEGNSG503Monitor and control field activitiescurrent
UEGNSG504Monitor and control gas infrastructure using Control Centre systemscurrent
UEGNSG505Operate and monitor gas infrastructure to meet nominated demandcurrent
UEGNSG506Respond to gas infrastructure emergenciesnot current
UEGNSG507Remotely monitor and operate gas transmission flow and pressure measuring and regulating devicesnot current
UEGNSG614Load, unload, exchange and connect LPG cylindersnot current
UEGNSG615Fill LPG cylindersnot current
UEGNSG616Refurbish gas cylindersnot current
UEGNSG617Monitor and control the transfer of bulk LPGnot current
UEGNSG618Process liquefied petroleum gas (LPG)not current
UEGNSG619Perform scheduled maintenance on gas processing or storage facilities and equipmentnot current
UEGNSG620Organise the repair of faults in LPG processing or storage facilities and equipmentnot current
UEGNSG621Control bulk storage of LPGnot current
UEGNSG622Assess the operational capability of gas safety equipment on a delivery vehiclenot current
UEGNSG705Disconnect and reconnect small capacity gas metersnot current
UEGNSG706Test new residential and small commercial gas installationsnot current
UEGNSG708Pressure test residential and small commercial gas installationsnot current
UEGNSG711Process meter reading information using appropriate technologynot current
UEGNSG712Read and record meter readingsnot current
UEGNSG713Investigate billing exceptions-conditionsnot current
UEGNSG714Relight Type A gas appliancesnot current
UEGNSG804Maintain single stage and single run gas flow and pressure control and measuring devicesnot current
UEGNSG805Maintain multi-stage and multi-run gas flow and pressure measuring and regulating devicesnot current
UEGNSG806Maintain SCADA controlled flow and pressure equipment and electronic gas measurement equipmentnot current
UEGNSG807Install gas flow, measuring and pressure regulating devicesnot current
UEGNSG811Monitor and operate complex flow control, measuring and regulating devices for gas distributionnot current
UEPMNT367Install and commission stationary gas fuelled reciprocating enginescurrent
UEPMNT368Repair and maintain stationary gas fuelled reciprocating enginescurrent
UEPOPS203Operate and monitor communications systemnot current
UEPOPS205Conduct minor mechanical maintenancenot current
UEPOPS317Operate and monitor fixed fire protection systemsnot current
UEPOPS336Manage, operate and monitor a gas turbine unitnot current
UEPOPS347Operate and monitor supervisory, control and data acquisition systemsnot current
UETTDREL14Working safely near live electrical apparatus as a non-electrical workernot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEG training product on the register · Search all training products

Is UEG40220 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.