Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
- UEG40311Superseded — not equivalentCertificate IV in Gas Supply Industry Operations
- ≠not equivalent
- UEG40114Superseded — equivalentCertificate IV in Gas Supply Industry Operations
- =equivalent
- UEG40118Superseded — equivalentCertificate IV in Gas Supply Industry Operations
- =equivalent
- UEG40220Superseded — equivalentCertificate IV in Gas Supply Industry Operations
- =equivalent
- UEG40221Superseded — not equivalentCertificate IV in Gas Supply Industry Operations
The chain does not end here: we draw five steps at most, and training.gov.au points on from UEG40221 to UEG40222, which it flags ≠not equivalent to UEG40221. Follow it from that page.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is UEG40311 on your scope?
This page is the register's record of one product. What it cannot tell you is whether UEG40311 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What UEG40311 is made of
training.gov.au lists 86 units for UEG40311: 6 core and 80 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 6 listed
| Code | Unit | In this product |
|---|---|---|
| UEENEEE101A | Apply Occupational Health and Safety regulations, codes and practices in the workplace | !not current |
| UEENEEE117A | Implement and monitor energy sector OHS policies and procedures | !not current |
| UEGNSG102B | Carry out work activities in a utilities industry work environment | !not current |
| UEGNSG104B | Comply with environmental policies and procedures | !not current |
| UEGNSG105B | Establish the work site | !not current |
| UEGNSG309B | First on site emergency response on a transmission pipeline | !not current |
Elective units 80 listed
| Code | Unit | In this product |
|---|---|---|
| BSBCUS401B | Coordinate implementation of customer service strategies | !not current |
| BSBINM401A | IMPLEMENT WORKPLACE INFORMATION SYSTEM | !not current |
| BSBLED401A | Develop teams and individuals | !not current |
| BSBMGT402A | Implement operational plan | !not current |
| BSBMGT403A | Implement continuous improvement | !not current |
| BSBWOR401A | Establish effective workplace relationships | !not current |
| BSBWOR402A | Promote team effectiveness | !not current |
| BSBWOR404B | Develop work priorities | !not current |
| CPCPCM4012A | Estimate and cost work | !not current |
| HLTCPR211A | Perform CPR | !not current |
| HLTFA311A | Apply first aid | !not current |
| UEENEEE102A | Fabricate, assemble and dismantle utilities industry components | !not current |
| UEENEEE107A | Use drawings, diagrams, schedules, standards, codes and specifications | !not current |
| UEENEEM020A | Attend to breakdowns in hazardous areas - gas atmospheres | !not current |
| UEENEEM076A | Use and maintain the integrity of a portable gas detection device | !not current |
| UEENEEM080A | Report on the integrity of explosion-protected equipment in a hazardous area | !not current |
| UEGNSG106B | Coordinate repair of pipeline, facilities and equipment | !not current |
| UEGNSG107B | Control gas odourisation | !not current |
| UEGNSG108B | Operate and monitor pipeline control systems | !not current |
| UEGNSG109B | Control field pipeline operations | !not current |
| UEGNSG110B | Supervise technical operations for gas distribution or transmission | !not current |
| UEGNSG111B | Produce maintenance strategies and plans for a gas facility | !not current |
| UEGNSG112B | Conduct isolation procedures for permit to work system for a gas industry work site | !not current |
| UEGNSG125A | Carry out transmission pipeline construction work activities | !not current |
| UEGNSG131A | Compile a gas industry technical report | !not current |
| UEGNSG202B | Construct and lay distribution pipelines and services | !not current |
| UEGNSG203B | Commission or decommission gas distribution pipelines | !not current |
| UEGNSG204B | Coordinate and conduct gas distribution pipeline repair and modifications | !not current |
| UEGNSG205B | Launch and recover PIG in a gas distribution pipeline | !not current |
| UEGNSG206B | Perform routine maintenance on distribution pipeline facilities and equipment | !not current |
Show the remaining 50 elective units
| Code | Unit | In this product |
|---|---|---|
| UEGNSG207B | Coordinate construction, laying and testing of gas distribution pipelines | !not current |
| UEGNSG208B | Gas distribution pipeline surveillance | !not current |
| UEGNSG210B | Supervise and monitor contract staff for work on distribution pipelines | !not current |
| UEGNSG215A | Conduct excavations in the gas industry | !not current |
| UEGNSG301B | Coat gas pipelines | !not current |
| UEGNSG302B | Maintain pipeline easements | !not current |
| UEGNSG304B | Commission or decommission gas transmission pipelines | !not current |
| UEGNSG305B | Coordinate gas transmission pipeline repair and modifications | !not current |
| UEGNSG306B | Pipeline pigging in gas transmission pipeline | !not current |
| UEGNSG307B | Perform routine maintenance on transmission pipeline facilities and equipment | !not current |
| UEGNSG308B | Identify, evaluate and control threats to transmission pipelines | !not current |
| UEGNSG310B | Supervise and monitor contract work | !not current |
| UEGNSG311B | Site control of third party works in the vicinity of a transmission pipeline | !not current |
| UEGNSG312B | First response to a facility event | !not current |
| UEGNSG313B | Check and report on station conditions | !not current |
| UEGNSG314B | Liaise with third party and the community to maintain pipeline integrity and community safety | !not current |
| UEGNSG315B | Aerial transmission pipeline surveillance | !not current |
| UEGNSG316B | Site control of excavations in the vicinity of a transmission pipeline | !not current |
| UEGNSG317B | Monitor and report on cathodic protection systems | !not current |
| UEGNSG318B | Monitor and operate flow control, pressure, measuring and regulating devices for gas transmission | !not current |
| UEGNSG319B | Custody transfer metering and gas quality analysis | !not current |
| UEGNSG320A | Establish right of way access for transmission pipeline construction | !not current |
| UEGNSG324A | Follow company procedures to deal with incidents related to the abuse of drugs and alcohol | !not current |
| UEGNSG325A | Coordinate the operation of relevant plant and equipment for transmission pipeline construction | !not current |
| UEGNSG326A | Coordinate and monitor staff and contractors | !not current |
| UEGNSG327A | Coordinate transmission pipeline construction operations | !not current |
| UEGNSG328A | Supervise the operation of plant and equipment for the construction of transmission pipelines | !not current |
| UEGNSG329A | Gas transmission pipeline surveillance | !not current |
| UEGNSG401B | Maintain cathodic protection systems | !not current |
| UEGNSG402B | Install cathodic protection systems | !not current |
| UEGNSG501B | Operate gas infrastructure to meet nominated demand | !not current |
| UEGNSG502B | Control centre communication with gas industry stakeholders | !not current |
| UEGNSG504B | Monitoring and controlling field activities | !not current |
| UEGNSG505B | Use control centre systems to monitor and control gas infrastructure | !not current |
| UEGNSG602B | Load, discharging LPG by road tanker | !not current |
| UEGNSG603B | Load, unload and exchanging gas cylinders | !not current |
| UEGNSG604B | Fill gas cylinders | !not current |
| UEGNSG605B | Refurbish gas cylinders | !not current |
| UEGNSG606B | Monitor and control the transfer of LPG | !not current |
| UEGNSG607B | Process LPG | !not current |
| UEGNSG608B | Perform minor maintenance on gas processing/storage facilities and equipment | !not current |
| UEGNSG609B | Coordinate repair of faults in gas processing/storage facilities and equipment | !not current |
| UEGNSG610B | Control storage of LPG in terminal | !not current |
| UEGNSG611B | Control LPG storage/processing operations | !not current |
| UEGNSG612B | Supervise technical operations for liquefied petroleum gas storage and processing | !not current |
| UEGNSG613A | Assess the operational capability of gas safety equipment on a delivery vehicle | !not current |
| UEGNSG703B | Investigate billing exceptions-conditions | !not current |
| UEGNSG801B | Monitor and operate complex flow control, measuring and regulating devices for gas distribution | !not current |
| UETTDREL14A | Working safely near live electrical apparatus as a non-electrical worker | !not current |
| UETTDREL15A | Respond to power systems technical enquiries and requests | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every UEG training product on the register · Search all training products
Is UEG40311 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.