MEM13002 Undertake work health and safety activities in the workplace

Supersededtraining.gov.au: supersededEquivalent

The currency period for MEM13002 ended on 17 December 2022 — 3 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 19 December 2023 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Unit of competency
Training package
MEM — Manufacturing and Engineering
Currency period ends
17 December 2022
Latest release
Release 1 · 26 June 2019
Supersedes
MEM13002B
Superseded by
MEM13019 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. MEM13002Superseded — equivalentUndertake work health and safety activities in the workplace
  2. equivalent
  3. MEM13019CurrentUndertake work health and safety activities in the workplace

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • MEM13002BMEM13002equivalent25 June 2019

    Supersedes and is equivalent to MEM13002B Undertake occupational health and safety activities in the workplace

  • MEM13002MEM13019equivalent18 December 2022

    The register records this supersession but attaches no note on what changed.

Is MEM13002 on your scope?

This page is the register's record of one product. What it cannot tell you is whether MEM13002 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where MEM13002 is used

training.gov.au lists MEM13002 inside 15 training products, 12 of them current. Every one of them is below, with the register's own core or elective flag for MEM13002 in that product.

Current products 12 listed

CodeTraining productTypeMEM13002 is
MEM20219Certificate II in Engineering - Production TechnologyQualificationelective
MEM30119Certificate III in Engineering - Production SystemsQualificationelective
MEM30219Certificate III in Engineering - Mechanical TradeQualificationelective
MEM30619Certificate III in Jewellery ManufactureQualificationelective
MEM30719Certificate III in Marine Craft ConstructionQualificationelective
MEM30819Certificate III in LocksmithingQualificationelective
MEM31019Certificate III in Watch and Clock Service and RepairQualificationelective
MEM31119Certificate III in Engineering - Composites TradeQualificationelective
MEM31419Certificate III in Engineering - Fixed and Mobile Plant MechanicQualificationelective
MEM31719Certificate III in Engineering - Casting and Moulding TradeQualificationelective
MEM40119Certificate IV in EngineeringQualificationelective
MEM50119Diploma of Engineering - Advanced TradeQualificationelective

Products no longer current 3 listed

The register still records MEM13002 inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

CodeTraining productTypeMEM13002 is
MEM30319Certificate III in Engineering - Fabrication TradeQualificationelective
MEM31319Certificate III in Refrigeration and Air ConditioningQualificationelective
MSS40118Certificate IV in Sustainable OperationsQualificationelective

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MEM training product on the register · Search all training products

Is MEM13002 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.