MTMCOR203A Apply Quality Assurance practices

Supersededtraining.gov.au: supersededEquivalent

The currency period for MTMCOR203A ended on 19 December 2012 — 13 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 21 December 2013. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Unit of competency
Training package
MTM11 — Australian Meat Industry Training Package
Currency period ends
19 December 2012
Latest release
Release 1 · 22 July 2011
Supersedes
MTMMP3C
Superseded by
MTMCOR203B equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. MTMCOR203ASuperseded — equivalentApply Quality Assurance practices
  2. equivalent
  3. MTMCOR203BSuperseded — equivalentComply with Quality Assurance and HACCP requirements
  4. equivalent
  5. AMPCOR203Superseded — equivalentComply with Quality Assurance and HACCP requirements
  6. equivalent
  7. AMPQUA206CurrentFollow food safety and quality programs

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • MTMMP3CMTMCOR203Anot equivalent21 July 2011

    Required Skills and Knowledge adjusted to CAT template; Unit code changed;

  • MTMCOR203AMTMCOR203Bequivalent20 December 2012

    The title and unit descriptor have been changed to better reflect the unit content.

Official documents on the register

What training.gov.au lists for MTMCOR203A and for its training package MTM11 (release 4.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

Is MTMCOR203A on your scope?

This page is the register's record of one product. What it cannot tell you is whether MTMCOR203A sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where MTMCOR203A is used

training.gov.au lists MTMCOR203A inside 23 training products, none of them current. Every one of them is below, with the register's own core or elective flag for MTMCOR203A in that product.

Products no longer current 23 listed

The register still records MTMCOR203A inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

CodeTraining productTypeMTMCOR203A is
MTM10111Certificate I in Meat Processing (Smallgoods)Qualificationcore
MTM20111Certificate II in Meat Processing (Abattoirs)Qualificationcore
MTM20211Certificate II in Meat Processing (Smallgoods)Qualificationcore
MTM20311Certificate II in Meat Processing (Meat Retailing)Qualificationelective
MTM20411Certificate II in Meat Processing (Food Services)Qualificationelective
MTM30111Certificate III in Meat Processing (Boning Room)Qualificationelective
MTM30211Certificate III in Meat Processing (Food Services)Qualificationelective
MTM30311Certificate III in Meat Processing (Meat Safety)Qualificationelective
MTM30411Certificate III in Meat Processing (Rendering)Qualificationcore
MTM30511Certificate III in Meat Processing (Slaughtering)Qualificationelective
Show the remaining 13 products no longer current
CodeTraining productTypeMTMCOR203A is
MTM30611Certificate III in Meat Processing (General)Qualificationcore
MTM30811Certificate III in Meat Processing (Retail Butcher)Qualificationcore
MTM30911Certificate III in Meat Processing (Smallgoods - General)Qualificationcore
MTM31011Certificate III in Meat Processing (Smallgoods - Manufacture)Qualificationcore
MTM40111Certificate IV in Meat Processing (Leadership)Qualificationcore
MTM40211Certificate IV in Meat Processing (Meat Safety)Qualificationcore
MTM40411Certificate IV in Meat Processing (General)Qualificationcore
MTMSS00033Meat Hygiene Assesment (Carcase) Skill SetSkill setcore
MTMSS00034Meat Hygiene Assessment (Carton Meat) Skill SetSkill setelective
MTMSS00035Meat Hygiene Assessment (Offal Room) Skill SetSkill setcore
MTMSS00036Meat Hygiene Assessment (Process Monitoring) Skill SetSkill setcore
MTMSS00037Meat Hygiene Assessment Officer Skill SetSkill setcore
MTMSS00045Meat Processing Core Skill SetSkill setcore

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MTM training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is MTMCOR203A still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.